background image

www.redbackaudio.com.au

Redback® Proudly Made In Australia

1

Redback® A 4505C

 Lockdown Timer with Network Access

Operating Manual 

A 4505C

 Lockdown Timer

Optional  Accessories 

A 2064 

Lockdown/Fire/Cancel Remote Wall Plate (Hard Wired)

A 2069 

Lockdown/Fire/Bell/Cancel Remote Wall Plate (Hard Wired)

A 4599 

Lockdown/Fire/Bell/Cancel Remote Wall Pl

ate

 (U/UTP Cat5)

 

A 4599V 

Lockdown/Fire/Bell/Cancel Remote Wall Pl

ate

 

(U/UTP Cat5)

A 4579 

Timer Isolate Remote Wall Plate (U/UTP Cat5)

IMPORTANT NOTE: 

Please read these instructions carefully from front to back prior to installation. 

They include important setup instructions. 

Failure to follow these instructions may prevent the unit from working as designed.

A 4599

 Remote Plate

A 2069

 Remote Plate

Distributed by Altronic Distributors Pty. Ltd. 

Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au 

User manual revision number: 1.1 08/08/2022

A 4599V

 Remote Plate

A 2064

 Remote Plate

IMPORTANT NOTE: 

These instructions are only suitable for A 4505C models or A 4505B 
models which have been upgraded with the A 4505C firmware.   
Firmware updates are available from altronics.com.au or 
redbackaudio.com.au. 

A 4579

 Remote Plate

Summary of Contents for A 4505C





















Reviews: