This unit can display picture files recorded on CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with label side up.
3. Close the disc door.
4. The unit will load the disc and automatically display
the contents of the disc on the screen, while playing the
beginning of the first picture file. These files will then be
played back one by one. If the unit does not automatically
start playing, press the
PLAY button.
5. Press
STOP or RETURN button to enter the contents of
the disc. Then press the , , or CURSOR button
to select a picture that you want to view, and press the
OK
button to confirm.
6. Now the picture slideshow begins with the selected picture.
Notes:
• You can press the
PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
• You can use the
GOTO function or use the numbered buttons to enter the number of a picture file
to quickly select the image.
• During playback, press the
ZOOM button to enlarge the picture in 3 levels (2, 3 and 4 times) only
while HDMI resolution is set to 480p.
• During playback, press
to rotate picture anti-clockwise by 90°, press to rotate picture clockwise
by 90°; press to flip picture vertically, press to flip picture horizontally.
• When using HDMI cable, set the HDMI Audio
to PCM.
• Press the
HDMI button on the remote control in
stop mode to change output signals as below:
480p (progressive)
720p (progressive)
1080i (interlace)
1080p (progressive)
Notes:
• Refer to your owner’s manual to the connected
TV as well.
• When you connect the DVD player to your TV,
be sure to turn off the power and unplug both
units from the wall outlet before making any
connections.
• If you have a HDMI (with HDCP) equipped
monitor or display, you can connect it to this
player using a HDMI cable.
Slow-motion Play
1. Press the
SLOW button on the remote in play
mode.
• Each time the
SLOW button is pressed, the
speed of slow-motion playback changes in
the following sequence:
SF 1/2
SF 1/4
SF 1/8
PLAY
2. Press the
PLAY button to return to normal
playback speed.
Note: To return to normal playback speed, you
can also press
SLOW button repeatedly until
PLAY displays on the screen.
Audio Selection
On some DVDs, the sound is recorded in two
or more formats. Follow the directions below
to select the preferred language and sound
system.
1. While a disc is playing, press the
AUDIO
button to show the current audio format
number. e.g.
2. Press the
AUDIO button repeatedly to select
the desired audio format.
Notes:
• If only one audio format is recorded on the
DVD, the number does not change.
• Some DVDs allow you to change audio
selections only via the disc menu. If this is the
case, press the
MENU button and choose the
appropriate language on the disc menu.
• You can select different audio channels
(STEREO, MONO L, MONO R or MIX
MONO) on an Audio CD by pressing the
AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the
SUBTITLE
button to display the current language
setting, as shown in the example.
[1 ENGLISH ]
2. Press the
SUBTITLE button repeatedly
to select the desired subtitle language.
You can turn subtitles off by pressing the
SUBTITLE button repeatedly until the
[ OFF ]
is
displayed.
Notes:
• Some DVDs are set to display subtitles
automatically, and you cannot turn them off
even if you set the subtitle function to off.
• During some scenes, the subtitles may not
appear immediately after you select your
desired scene.
• The number of subtitle languages recorded
differs depending on the disc. If only one
language is recorded, the language does not
change.
• This function can only be used for discs
on which subtitles have been recorded in
multiple languages.
• Some DVDs allow you to change subtitles
only via the disc menu. If this is the case,
press the
MENU button and choose the
appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have been
shot from a number of different angles. For these
discs, the same scene can be viewed from each
of these different angles.
1. While you are playing a DVD with different
angles recorded, press the
ANGLE button to
view the number of current angles available.
2. Press the
ANGLE button repeatedly to
change the scene to the next recorded angle.
e.g.
• After approx. two seconds, playback will
continue from the new angle you selected.
• If no button is pressed within 10 seconds,
playback continues without changing the
current angle.
Notes:
• This function can only be used for discs on
which scenes shot from multiple angles have
been recorded.
• If only one angle is recorded,
is
displayed.
Display Function
While the disc is playing, press the
DISPLAY
button on the remote control repeatedly to
display information on operation status.
Elapsed Time:
Elapsed time from the beginning
of the chapter/title which is currently playing.
Remaining Time: Remaining time of the
chapter/title which is currently playing.
-
T
C
-
T
02:01:22
00:30:15
00:12:03
Chapter Remaining Time
Chapter Elapsed Time
Title Elapsed Time
Title Remaining Time
Playing a Disc
1. Press the
STANDBY / ON button to turn
on the unit.
See
CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2.
2. Press the
OPEN/CLOSE button to open
the disc tray.
3. Place a disc onto the disc tray with the label
side up.
4. Press the
OPEN/CLOSE button to close
the disc tray. It takes a short while for your unit
to load the disc. After loading, for most DVDs,
the unit will automatically take you main menu
or start playing.
5. If the unit does not automatically start playing
the DVD, press the
PLAY button.
Pausing Playback (Still Mode)
Press the
PAUSE button on the remote. To
resume normal playback, press the
PLAY
button.
Frame Advance
1. Each time you press
STEP button, the
picture advances one frame.
2. Press
PLAY to resume normal playback.
Stopping Playback
• Press the
STOP button at the location
where you want to interrupt playback. To
resume playback at the position where
the disc was stopped, press the
PLAY
button.
• If you press the
STOP button twice, the
unit’s memory will be cleared and pressing
the
PLAY button will reset the disc to the
beginning.
Zooming into an image
While a disc is playing, press the
ZOOM button
to enlarge the image in several levels.
ZOOM 2
ZOOM 3
ZOOM 4
ZOOM: OFF
• While an image is zoomed in, you can use the
, , or CURSOR button to shift the
view and display the part you want.
• To return to normal view, press the
ZOOM
button until the
ZOOM: OFF
shows. The
screen will return to normal.
• When you reach the edge of the image, the
display will not shift anymore in that direction.
Skipping (Forward / Reverse)
• Press the
PREV button to go back to
current or previous chapters/tracks.
• Press the
NEXT button to advance
chapters/tracks.
• For audio CDs, use the number buttons on
the remote control to jump immediately to the
desired track number.
Fast Forward / Fast Reverse
1. Press the
SEARCH
or SEARCH
button when a disc is playing. Each time
you press the
SEARCH
or SEARCH
button, the playback speed changes in the
following sequence:
FORWARD x 2
FORWARD x 8
FORWARD x 30
FORWARD x 100
PLAY
BACKWARD x 2
BACKWARD x 8
BACKWARD x 30
BACKWARD x 100
PLAY
2. Press the
PLAY button when you reach
the desired point to resume normal playback.
Notes:
• The unit mutes sound and subtitles during
reverse and forward scan of DVDs.
• The fast playback speed may differ depending
on the disc.
• T
o return to normal playback speed, you can
also press the
or
button repeatedly
until
PLAY displays on the screen.
Playing Titles/Chapters/Tracks in a Favorite Order
You can combine your favorite titles/chapters/tracks and play them in the order you determine.
1. Press the
MEMORY button and the following display appears.
2. Select the items in the order you want by pressing the number
buttons. Each time you press the Cursor buttons (
, , , ),
the space is highlighted. Highlight where you want to enter, then
press the corresponding number buttons.
3. Press the Cursor buttons ( , , , ) to move the highlighted
bar to “PLAY”, then press the
OK button. The DVD player starts
memory playback.
4. To resume normal playback from memory playback
a) Press the
MEMORY button.
b) Press the Cursor buttons ( , , , ) to move the highlighted
bar to “CLEAR”, then press the
OK button to clear all the input
programs. Alternatively, you can press the
STOP button to
clear all the input programs.
c) Press the
PLAY button to resume normal playback.
Notes:
• If the title, chapter or track numbers you entered is not permitted
by the disc, after you press the
OK button, it will restore to
(title, chapter) or
(track).
You should re-enter correct
numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory
playback.
• If you press the
MEMORY button while the display appears on the TV screen, the display
disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD
player.
Locating a Specific Chapter / Track / Title / Time
If you know the chapter / track / title / time number you want to play, you can locate a specific chapter
/ track / title / time by directly selecting a chapter / track / title / time number.
1. Press the
GOTO button to search your desired chapter / track / title / time.
2. Press , , or button to highlight a chapter / track / title / time and press the corresponding
number button(s) for the chapter / track / title / time you want.
3. Press the
OK button to confirm. The unit will start playback about 3 seconds later.
Notes :
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD
disc.
You can play a specific title or chapter repeatedly.
(Title repeat, chapter repeat, all repeat, A-B
repeat)
Repeating a chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the
REPEAT
DISC button until the
REPEAT:
[CHAPTER]
indicator displays
on the screen. The current chapter is played
repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While
the
disc
is
playing,
press
the
REPEAT DISC button until the
REPEAT:
[TITLE]
indicator displays
on the screen. The current title is played
repeatedly.
Repeating a whole disc
3. While
the
disc
is
playing,
press
the
REPEAT DISC button until the
REPEAT:
[ALL REPEAT]
indicator
displays on the screen. The whole disc is
played repeatedly.
To resume normal playback
4. While
the
disc
is
playing,
press
the
REPEAT DISC button until the
REPEAT:
[OFF]
indicator displays on
the screen.
You can play a single track and whole disc
repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While
the
disc
is
playing,
press
the
REPEAT DISC button until the
REPEAT:
[REP 1]
indicator displays
on the screen. The current track is played
repeatedly.
Repeating a whole disc
2. While
the
disc
is
playing,
press
the
REPEAT DISC button until the
REPEAT:
[ALL REPEAT]
indicator
displays on the screen. The whole disc is
played repeatedly.
To resume normal playback
3. Press the
REPEAT DISC button until the
REPEAT:
[OFF]
indicator displays on
the screen.
You can play a specific section repeatedly.
Repeating a specific section
1. While the disc is playing, press the
REPEAT
A-B button at the beginning of the section (
REPEAT A-
is displayed) you want to play
repeatedly.
2. Press the
REPEAT A-B button again at
the end of the section (
REPEAT A-B
is
displayed).
3. The unit will immediately begin replaying your
selection.
To resume normal playback
4. While the disc is playing, press the
REPEAT
A-B button until the
REPEAT A-B OFF
indicator displays on the screen.
Notes:
• Some discs may not permit A-B repeat
operation.
• A-B repeat can only be used within the same
title. If the start and end of the section to be
repeated are in different titles, A-B repeat is
cancelled.
• You can specify a segment only within the
current title or track.
• The A-B repeat function does not operate in
scenes where different camera angles are
recorded.
PLAYING A DISC
This user manual explains the basic instructions
for operating this unit. Some DVDs are produced
in a manner that allows specific or limited
operation during playback. Therefore, this unit
may not respond to all operating commands.
THIS IS NOT A DEFECT. Please refer to the
instructions accompanying the specific DVD in
question for more information about the options
available on that DVD.
may appear on the screen during operation.
It means that the desired operation is not
permitted by the unit or disc.
PLAYING PICTURE FILE DISC
PRoGRAmmAbLE mEmoRY
REPEAT PLAYbACK
LoCATING A DESIRED SECTIoN
CUSTomIZING THE FUNCTIoN SETTINGS
Sequence of angle shots (Example)
: [ 2 / 3 ]
B. CONNECTING TO A DISPLAY (Using a
HDMI cable)
For TVs that support it, HDMI can provide the
best quality audio and video output (depending on
media source), and so is the preferred connection
type. The HDMI cable incorporates both audio
and video signals, so you will have just one cable
running from the unit to your TV. Using a HDMI
cable (not included), connect the HDMI OUT jack
on your unit to the HDMI IN jack on your TV or
HDMI-compatible display.
• When using a HDMI cable, do not connect to
other analog video outputs.
• Set an output signal from the HDMI terminal of
the DVD player in accordance with your TV’s
input signal.
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
A. ANALOG CONNECTION
Using an audio/video cable, connect the left/right
AUDIO OUT jack on your unit to the AUDIO IN
jack on your other source.
B. DIGITAL CONNECTIONS (preferred)
This unit has two digital audio outputs – a
COAXIAL digital audio output, and an OPTICAL
digital audio output. Either will provide multi-
channel (“surround sound”) audio if the DVD
being played contains multi-channel content.
Simply connect a coaxial (not included) or optical
(not included) cable from the coaxial or optical
output of your unit to the coaxial or optical input
of your Audio or Home Theater system.
Notes:
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the
equipment from the wall outlet before making any connections.
• If the external equipment is television and this audio system is close to it, you may experience the
interference if the tuner function is selected while the television is working.
• Refer to the instruction manual of the connected equipment as well.
HDMI Resolution
1. Press the
SETUP button.
2. Press the
/
button to select HDMI
RESOLUTION.
3. Press the
OK button, then the / button to
select the options (480p, 720p, 1080i or 1080p).
4. Press the
OK button.
5. Press the
SETUP or RETURN button to exit
the menu.
Note: Select the resolution according to the
performance of the connected TV.
TV Shape
1. Press the
SETUP button.
2. Press the /
button to select TV SHAPE.
3. Press the
OK button, then the / button
to select the options (4:3PS, 4:3LB or 16:9).
4. Press the
OK button.
5. Press the
SETUP or RETURN button to exit
the menu.
4:3 PS (Pan Scan)
• When
wide-screen
video is played, this
mode clips the right and
left sides of the image so
that it can be viewed on
a conventional screen.
• Some
wide-screen
DVDs that do not
permit
Pan
Scan
mode playback are
automatically played in
Letter Box mode (black
bands top and bottom).
4:3 LB (Letter Box)
• When
wide-screen
video is played in this
mode on a conventional
screen, black bands
appear at the top and
bottom of the screen.
16:9 (Wide Screen)
• This is the correct
mode
for
playing
widescreen videos on
a wide-screen.
Notes:
• The displayable picture size is preset on the
DVD. Therefore, the playback picture of some
DVDs may not conform to the picture size you
select.
• When you play DVDs recorded in the 4:3
picture size only, the playback picture always
appears in the 4:3 picture size regardless of
the TV shape setting.
• Always be sure that your TV shape conforms
to the actual TV in use if you connect the unit
to a TV.
Default
1. Press the
SETUP button.
2. Press the /
button to select DEFAULT.
3. Press the
OK button, then the / button
to select “YES”.
4. Press
OK
button to confirm, the RESTORE
WARNING dialogue window displays.
RESTORE WARNING
Reset to
factory default?
10 SECS
YES NO
5. Press the /
button to select “YES” and
press the
OK button, the original setting
will be restored. The unit will exit the default
setting menu automatically and re-load the
disc in the disc tray.
Note: It will take 3-5 seconds to reset the DVD
player to the factory default.
Audio Output
1. Press the
SETUP button.
2. Press the / button to select
(audio).
3. Press the
/
button to select AUDIO
OUT.
4. Press the
OK button, then press the /
button to select the output sound format (OFF,
RAW or PCM).
5. Press the
OK button.
6. Press the
SETUP or RETURN button to exit
the menu.
RAW Disc audio raw data will be output.
Select this when connected to a multi-
channel (eg home theater) “surround
sound” amplifier.
PCM Select this when connected to a stereo
amplifier.
OFF
To disable Digital Output.
Note: If you connected to a TV using HDMI, and
you are using the TV’s speakers for your audio
source, then make sure to select “PCM”.
1. Press the
SETUP button.
2. Press the / button to select (video).
3. Press the / button to select the option
(BRIGHTNESS or CONTRAST), then press
the
OK button.
4. Press the / button to select a preferred
value, then press the
OK button. (The screen
will change to your selected setting).
5. Press the
SETUP or RETURN button to exit
the menu.
System
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
- 5 -
- 6 -
- 7 -
- 8 -
OSD Language
1. Press the
SETUP button.
2. Press the
/
button to select
(language).
3. Press the
/
button to select OSD
LANGUAGE.
Audio
Video
Track
Chapter
Title
Time
Folder(s)
Files within the
current folder
Language
16:9
4:3 LB
Cut off when a wide-
screen video image
is played.
4:3 PS
4. Press the
OK button, then the / button
to shift and change the Language.
5. Press the
OK button.
6. Press the
SETUP or RETURN button to exit
the menu.
Audio Language
1. Press the
SETUP button.
2. Press the
/
button to select
(language).
3. Press the
/
button to select AUDIO
LANG.
4. Press the
OK button, then the / button
to shift and change the Language.
5. Press the
OK button.
6. Press the
SETUP or RETURN button to exit
the menu.
Note: Some DVDs may not be played in the
language you selected. A prior language may be
programmed on the disc.
Subtitle Language
1. Press the
SETUP button.
2. Press the
/
button to select
(language).
3. Press the /
button to select SUBTITLE
LANG.
4. Press the
OK button, then the / button
to shift and change the Language.
5. Press the
OK button.
6. Press the
SETUP or RETURN button to exit
the menu.
Notes:
• Some DVDs may be set to display subtitles
in a different language other than the ones
you selected. A prior subtitle language may
be programmed on the disc.
• Some DVDs allow you to change subtitle
selections using the disc menu only. If this is
the case, press the
MENU button and choose
the appropriate subtitle language from the
selection on the disc menu.
Menu Language
1. Press the
SETUP button.
2. Press the
/
button to select
(language).
3. Press the
/
button to select MENU
LANG.
4. Press the
OK button, then the / button
to shift and change the Language.
5. Press the
OK button.
6. Press the
SETUP or RETURN button to exit
the menu.
Note:
• Some DVDs may not include your pre-selected
language. In this case, the DVD player
automatically displays disc menus consistent
with the disc’s initial language setting.
811-727791W042
Title Chapter
PROGRAM
PLAY CLEAR
Track
PROGRAM
PLAY CLEAR
HDMI RESOLUTION
TV SHAPE
DEFAULT
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
AUDIO OUT
BRIGHTNESS
CONTRAST
White
White
Red
Red
Audio Cable
(Red and White)
Amplifier of stereo
system, etc.
ANALoG CoNNECTIoN
OPTICAL
DIGITAL IN
DIGITAL
AUDIO IN
Coaxial Digital
Audio Cable
Or
Optical Digital
Audio Cable
DIGITAL CoNNECTIoNS (preferred)
Audio equipment with optical digital
in jack or digital audio input jack
SVP7277AS ENG IB-Sunplus.indd 1
2009-06-30 14:47:12
