Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Required Tools: (Not included)
A. Phillips screwdriver
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a Phillips screwdriver, remove ten (10) screws from
the bottom of the unit.
Flip the unit over and lift the deck being careful not to pull
the wires from the sensor pad. Set the deck cover aside.
ELECTRIC PARTY POP/ELECTRIC TEKNO
BATTERY INSTALLATION
REPLACEMENT PROCEDURES
PART # W13111701003
