A1-26pcs
A2-8pcs
B1-4pcs
B2-4pcs
B3-2pcs
B4-3pcs
C-4pcs
D1-4pcs
D2-4pcs
E-4pcs
F-1pcs
G-1pcs
10x40 mm
8X40mm
5x100mm
5x90mm
4x40mm
6x40mm
M12x100
M12
M12
M12
H-2pcs
2+2pcs
Wedge for
tool well
Ø 19 mm
Attention:
Assembly Instruction - PRO-AS
Workbench is made from high quality beech wood guaranteeing maximum resistance and long service life
of the bench
.
NOTICE:
•
The bench must not be left in damp or humid conditions which will cause movement in the wood.
Parts
Packing 1
Packing 2
Date
•
The bench must not be left in damp or humid conditions which will cause movement in the wood.
Recommended humidity level max. 60%.
•
If you bought workbench without surface treatment, we recommend you to finish the bench by colourless
varnish or oil including the bottom of workbench. Varnish (oil) prevents absorption of surrounding moisture.
Don´t forget to repeat surface treatment each 6 months
•
To increase the stability of your workbench we recommend you to bolt the bench to the floor.
•
Each 6 months tighten all screws and bolts
.
Ramia s.r.o., Zátaví 58, CZ-397 01 Písek, Czech Republic, , Tel: +420 382 264 450, fax: +420 382 264 450, www.ramia.cz
