![background image](http://html1.mh-extra.com/html/radio-shack/63-1058/63-1058_user-manual_778847001.webp)
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
63-1058
laser level
Laser Level
User’s Guide
Thank you for purchasing your laser level from
RadioShack.
• Keep the laser level dry. If it gets wet, wipe it dry
immediately.
• Use and store the laser level only in normal
temperature environments. Handle the laser level
away from dust and dirt, and wipe it with a damp
cloth occasionally to keep it looking new.
• Modifying or tampering with the laser level’s internal
components can cause a malfunction and might
invalidate its warranty.
• If your laser level is not performing as it should, take
it to your local RadioShack store for assistance.
This product is warranted by RadioShack against manufacturing defects in material
and workmanship under normal use for one (1) year from the date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and dealers.
For complete warranty details and exclusions, check with your local RadioShack store.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
04/04
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
63-1058
06A04
Printed in China
Your RadioShack Laser Level is a high quality laser
level incorporating advanced laser optics and
microelectronics. The machined aluminum body of the
laser level is equipped with two high quality bubbles,
one horizontal and one vertical. Every laser level must
pass a critical vibration test before leaving the factory.
This test assures the accuracy of the laser within 0.2
inches (5.08mm) at a distance of 30 feet (9.1m).
Your laser level requires two AAA batteries (not supplied). Batteries are available at your local RadioShack store or
online at www.radioshack.com.
1. Remove the battery
cover by turning
counter-clockwise.
Replace when fi nished.
battery notes
• When the laser beam dims, or stops operating
properly, replace the batteries.
• Dispose of old batteries promptly and properly. Do
not burn or bury them.
• Use only fresh batteries of the required size and
recommended type. Do not mix batteries of different
types, capacities, or chemistries.
• If you do not use your laser pointer for several days,
remove the batteries. Batteries can leak chemicals
that may destroy electronic parts.
2. Arrange the batteries
in the compartment
as indicated by the
polarity symbols (+
and -) on the laser
level body.
using your laser pointer
1. Press the ON/OFF button on the battery cover to turn
the laser level on.
2. Place the laser level on the reference object with the
base touching.
3. Aim at the object you want to measure.
4. Slide the lens toward the dot (
) to project a laser
DOT.
Slide the lens toward the line (—) to project a laser
LINE.
When the vertical or the horizontal bubble is between
the two black lines and the laser level itself is level,
the projected line or dot is either vertical or horizontal.
line
ON/OFF
switch and
battery
cover
lens: slide
up/down
to project
line/dot
horizontal
bubble
vertical
bubble
dot
important safety precautions
•
Warning!
Never point the laser at anyone.
•
Warning!
Follow the instructions on the danger label.
•
Warning!
Never look directly into the laser beam.
•
Warning!
Keep laser pointer away from children.
•
Warning!
Use of controls or adjustments, or the
performance of procedures other than specifi ed
herein, can result in hazardous radiation exposure.
•
Warning!
Laser light, when refl ected by a mirror-like
surface, can also be dangereous.
product specifi cations
Laser Type ........................................................................ IndexGuided
Wavelength ......................................... 650±10nm (Class IIIA Product)
Output Power ............................................................................. <5mW
Operation Range ................................................................... >600 feet
Battery LIfe ...................................................................25 hrs (alkaline)
Beam type ................................................................. Dot or Horizontal
Material ................................................................................ Aluminum
Specifi cations are subject to change and improvement without notice.
Individual units may vary.
tips
1. Make sure that the laser level itself is level before
you work from the laser beam reference point. To do
this, place the laser level on your reference surface.
2. You can use the laser level on a tripod with the hole
on the bottom of the level.
Actual product may vary from the images
found in this document.
NOTE