![background image](http://html1.mh-extra.com/html/radio-shack/21-1706/21-1706_owners-manual_3450617001.webp)
©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
21-1706
OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing a RadioShack 40 Channel Mobile
CB. Your CB is a great way to communicate with other CB
radio operators. You can mount it in a vehicle for mobile
use, or in your home for use as a base station.
To use this CB, you must connect a mobile or base station
antenna. Your local RadioShack store has a wide variety of
antennas. For more information, see “Connecting an
Antenna” on Page 3.
#66#%*+0)
"
6*'
"
/+%412*10'
"
*1.&'4
You can attach the microphone holder to the right side of
the transceiver or to another location in your vehicle.
To attach the holder to the transceiver, secure the holder to
the right side using the supplied 3 mm machine screws and
lock washer.
To attach the holder to another location in the vehicle, such
as the dashboard, follow these steps.
1. Using the holder as a
template, mark the
positions for the
mounting screw
holes at the desired
location.
2. At each marked
position, drill a small
starter hole.
.#
.#
.#
.#
#
"
+/2146#06
"
#
If an icon appears at the end of a
paragraph, go to the side head box
on that page with the
corresponding icon for pertinent
information.
Rý
— Signifies a Warning
.
.
.
.
— Signifies a Caution
#
— Signifies Important text
%106'065
Attaching the Microphone Holder ........ 1
Mounting the Transceiver ................... 2
Connecting an Antenna ...................... 3
Connecting the Microphone ................ 4
Connecting an External Speaker ........ 4
Connecting a CB Speaker .......... 4
Connecting a PA Speaker .......... 4
Connecting the Compass .................... 4
Connecting an Optional
Microphone/Earphone ......................... 5
Traffic Safety .............................. 5
Using Vehicle Battery Power ............... 5
Using the Transceiver
as a Base Station ................................ 6
Using Your CB .................................... 6
Receiving Transmissions
and Adjusting Squelch .................... 6
Transmitting ..................................... 7
Selecting the Emergency Channel .. 7
Using the PA Amplifier ..................... 7
Using Monitor .................................. 8
Using the Compass ......................... 8
Using Memory ................................. 9
Using Last Channel Recall (RCL) ... 9
Adjusting the Backlight .................... 9
Transmission Courtesy .................... 9
Using Common 10-Codes ............. 10
Maximum Range ........................... 11
Troubleshooting ................................ 11
FCC Information ................................ 12
Reducing Noise ............................. 13
Care .................................................. 14
Service and Repair ........................ 14
Replacing the Fuse ....................... 14
Specifications .................................... 15
Parts and Accessories ...................... 16
.
"
%#76+10
"
.
Be careful not to drill into anything
behind the mounting surface.
62"
%JCPPGN
"
/QDKNG
"
%$
"
YKVJ
"
&KIKVCN
"
%QORCUU
"
CPF
"
'.
"
$CEMNKV
"
.%&
"
&KURNC[