![background image](http://html1.mh-extra.com/html/racor/bvfs-series/bvfs-series_manual_3182051001.webp)
Racor BVFS Series Filter vessels are designed to filter liquid and solid
contaminants from jet fuel, kerosene, diesel fuel, gasoline, aviation gas
and other hydrocarbon based liquids.
These filter vessels utilize proven Racor and Parker Hannifin technology
and may be used as coalescers, pre--filters or dehydrators by changing
internal components, flow direction and using optional filter cartridges
(factory configured). Water removing elements or silicone impregnated
pre--filters may also be used with these vessels. Filtration capabilities
down to 0.5 microns and less than 5 ppm water in fuels are obtainable.
Filter vessels feature single, double or triple length cartridges to meet
customer flow and filtration requirements.
Elements may also be
stacked to meet customer needs. Maximum flow rates of 50, 100 or 150
gallons per minute are possible, depending upon fluids or filter
cartridges.
Additionally, higher flows are possible by multiplexing
(factory configured).
The vessel is fabricated from carbon steel with an exterior primer coating
of Gavlon suede gray and the interior is epoxy coated which meets
MIL--C--4556E.
Accessories include differential pressure gauges, air eliminator, manual
or automatic drain valves and water sight gauges.
Vessels also feature adjustable legs for mounting ease.
Mounting Location
The BVFS Series are permanently installed units designed for pressure
applications up to 245 PSI at 250
_
F.
Install the unit in a location which provides accessibility, protection from
heat or flames and accidental impacts.
Always adhere to applicable
local piping regulations or codes. Use the maximum line size possible
and avoid reducers and elbows. (A shut--off valve is required prior to the
inlet fitting).
SPECIFICATIONS
BVFS- 1
BVFS- 2
BVFS- 3
Inlet / Outlet Ports,
2” NPT
2” NPT
2” NPT
Flow Rate, maximum
50 GPM / 189.3 LPM
100 GPM / 378.5 LPM
150 GPM / 568 LPM
Design Press. / Temp.
245 PSI @ 250
_
F
245 PSI @ 250
_
F
245 PSI @ 250
_
F
17 bar @ 121
_
C
17 bar @ 121
_
C
17 bar @ 121
_
C
Max. Allowable Working
Pressure
245 PSI / 17 bar
245 PSI / 17 bar
245 PSI / 17 bar
Replacement Elements
See element chart on back page
Overhead space required
for element change: in./mm
16 / 406
32 / 813
47 / 1194
Height
in./mm
39 / 991
51 / 1295
65 / 1651
Diameter
in./mm
13.5 / 343
13.5 / 343
13.5 / 343
Weight: dry/wet
lbs.
150 / 200
170 / 250
190 / 300
/kgs.
68 / 91
77 / 113
86 / 136
Filtration
Model
BVFS- 2
Shown
Air vent: 3/4” NPT
2” NPT PORT
2” NPT PORT
High Water
Level
Low Water
Level
Adjustable
Support Legs
Grounding
Stud
Product Information
BVFS Series Filter Vessels