background image

Installation, Operation and Maintenance Instructions

This manual is provided to acquaint you with the 

dehumidifier so that installation, operation and maintenance 

can proceed successfully. Ultimate satisfaction depends on 

the quality of installation and a thorough understanding 

of this equipment. The dehumidifier is built around tested 

engineering principles and has passed a thorough inspection 

for quality of workmanship and function.

Quest Dry

Installation, Operation and Maintenance Instructions

4201 Lien Rd 

Phone 608-237-8400

Madison, WI 53704 

Toll-Free 1-877-420-1330

www.QuestClimate.com [email protected] 

– Read and Save These Instructions –

Specifications subject to change without notice.

1

TS-1052 

05/18 Rev. B

50Hz Quest 155

50Hz Quest 155:

•  Industry-leading efficiency
•  Patented, optimized air-to-air heat exchanger
•  High-efficiency, long-life impeller fan
•  MERV-13 filtration
•  Auto-restart after power outages
•  Low voltage control

Water Removal Rates Per Day @ 26.7°C (80°F) 60% (AHAM)

 

 

Dehumidifier  Liters Pints/Gallons

 

Quest 155 

71 

150/18.7

Summary of Contents for 155





































Reviews: