background image

 

      7036-187M 

   

August 

13, 

2018

NOTICE: DO NOT DISCARD THIS MANUAL

R

MT VERNON PELLET INSERT

ADVANCED ENERGY (AE)

MODEL(S):

MTVERNINSAE-MBK

MTVERNINSAE-PMH

MTVERNINSAE-CSB

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

Contact your dealer with questions regarding installation, operation, or service. 

NOTE

To obtain a French translation of this manual, please 

contact your dealer or visit 

www.quadrafire.com

Pour obtenir une traduction française de ce manuel, s’il 

vous plaît contacter votre revendeur ou visitez 

www.quadrafire.com

CAUTION

Tested and approved for wood pellets, shelled field corn, 

wheat and black oil sunflower seeds. Burning of any 

other type of fuel voids your warranty.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down. 

Hot glass will cause burns.

•  Do not touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room as 

fireplace.

•  Alert children and adults to hazards of high 

temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other 

flammable materials away.

If the information in these instructions 

is not followed exactly, a fire may result 

causing property damage, personal injury, 

or death. 

WARNING

• 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any other 

appliance.

• 

Do not over fire - If appliance or chimney connector 

glows, you are over firing. Over firing will void your 

warranty.

•  Comply with all minimum clearances to combustibles 

as specified. Failure to comply may cause house fire.

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

CAUTION

Check building codes prior to installation:

•  Installation MUST comply with local, regional, state 

and national codes and regulations.

• 

Consult local building, fire officials or authorities 

having jurisdiction about restrictions, installation 

inspection, and permits.

Summary of Contents for MT VERNON

















































Reviews: