background image

1

STANDARD FEATURES

Some of the system’s standard features include:
• 4-button remote transmitter
• LED Status indicator 
• Valet switch
• Extended Range Receiver
• 125dB Multi-tone siren 
• Dual stage impact detector
• Remote panic
• Remote Valet  mode
• Remote chirp delete
• Remote sensor bypass
• Passive or active arming
• Flashing parking lights
• Auto Rearming

OPTIONAL FEATURES

This system has many optional features that

may require additional parts and/or labor.

Please contact your dealer for more details.
• Remote keyless entry (door lock/unlock)
• Illuminated entry
• LCD 2-way Remote
• Hood & trunk protection
• Trunk/hatch release
• Window roll-up
• Additional sensors 
• Remote Start (optional plug-in module)
• Stop & Go Feature
• Auto Cold Start
Note: Some features may not be appropriate

for certain vehicles.

REMOTE TRANSMITTER  BUTTONS

NOTE: Transmitter cosmetics may differ

between models and between standard 1-way

and LCD 2-way transmitters, but button

functions remain the same as described below.

Each transmitter button has two operating

modes: standard and level shifted. Pressing a

transmitter button for less than one second

activates the standard function associated with

that button (such as arm or disarm). Pressing a

button for more than one second changes the

color of the standard transmitter’s LED to

green and activates the level shift feature.

While the LED is green (level shifted), pressing

any transmitter button accesses another level

of commands providing expanded operation.

Transmitter Icons

Button 1

Button 2

Button 3

Button 4

SYSTEM MANUAL

VEHICLE SECURITY SYSTEM

Optional Remote Start Module and 2-way Transmitter Instructions Included

Summary of Contents for PWD250

























Reviews: