background image

1

GP3000H Soft-type Cable for 

GP2000H Conversion Adapter 

<RS-232C/RS-422 >

(with connector)

 Installation Guide

Thank you for purchasing Pro-face’s 

GP3000H Soft-type Cable for GP2000H 

Conversion Adapter <RS-232C/RS-422> 

(with connector) (Hereafter referred to as 

“this cable”). This cable is an optional cable 

designed to connect the GP3000H series unit 

(Hereafter referred to as the “GP3000H”) and 

the GP2000H series RS-232C or RS-422 

Conversion Adapter (Hereafter referred to as 

the “GP2000H Conversion Adapter”).
This cable comes in two types of 

communication methods, RS-232C or 

RS-422, each of which is available in two 

lengths of 3m and 10m. 
(This installation guide is valid for the 

common mode filter RSAL-2001W 

manufactured by TDK-Lambda 

Corporation.)

Safety Precautions

• Be sure to confirm that power is not 

being supplied to the GP3000H and 

the external devices before connecting 

this cable. Failure to do so can result in 

an electric shock.

• Do not modify this cable, since it may 

result in a fire or electric shock.

• This cable is not appropriate for use 

with aircraft control devices, aerospace 

equipment, central trunk data 

transmission (communication) devices, 

nuclear power control devices, or 

medical life support equipment, due to 

these devices inherent requirements of 

extremely high levels of safety and 

reliability.

• When using this cable with 

transportation vehicles (trains, cars 

and ships), disaster and crime 

prevention devices, various types of 

safety equipment, non-life support 

related medical devices, etc. use 

redundant and/or failsafe system 

designs to ensure reliability and safety.

Package Contents

(1) This Cable (1)
(2) Common Mode Filter (1)

- RSAL-2001W manufactured by TDK-

Lambda Corporation

(3) FG wire (1)
(4) Connector Cap (1)

 (attached to the cable connector)

(5) Installation Guide (1) (This Guide)

This cable has been carefully packed, with 

special attention to quality. However, should 

you find anything damaged or missing, please 

contact your local distributor immediately.

About the Manual

About the GP3000H 

• GP3000H Series Hardware Manual
• Maintenance/Troubleshooting
• GP-Pro EX Reference Manual “Hand 

Held GP”

How to connect the GP3000H to 

peripheral equipment 

• This Guide
• GP-Pro EX Device/PLC Connection 

Manual “GP3000H Series Connection 

Guide”

About the GP2000H Conversion 

Adapter 

• GP2000H Series RS-232C Conversion 

Adapter (GP2000H-AP232) Installation 

Guide 

• GP2000H Series RS-422 Conversion 

Adapter (GP2000H-AP422) Installation 

Guide 

The manuals can be selected from the help 

menu of GP-Pro EX or downloaded from 

Pro-face Home Page.

URL
http://www.pro-face.com/otasuke/

REV.A

Summary of Contents for GP3000H









Reviews: