1. Package Contents
You should have received the following items inside of package:
Charger unit Quick Guide C1 connector cable C2 connector cable AC input
(option)
power cord
2. Product Overview
Panel View:
DC connector
Current selection switch (Check
LED indicators (Check Indicator
Current Selection Table for the details)
Chart for the details)
Power switch
AC input
Indicator Chart:
Status
Indicators
Battery is charging.
In boost status
In floating status
“On” and “Boost” LEDs are on.
“On” and “Float” LEDs are on.
Battery Level
In full level
In mid. level
In low level
“Full” LED is on.
“MID.” LED is on.
“LOW” LED is on.
Current Selection Table (Amp)
Rotary Dip
Switch
Model
0 1 2 3 4 5
6
7 8 9
24
1
2
4
8
12 16 20
36
1
3
6
9
12 15
48
1
3
6
9
12 15
72
1
2
4
6
8
10 12
96
1
2
4
6
8
10
120
1
2
4
6
8
3. Installation and Initial Startup
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged.
Below is the DC connector color reference
Model
24
36
48
72
96
120
White
24V
Red
36V
Grey
48V
Blue
72V
Black
96V
Yellow
120V
Charge Battery:
1. If possible, disconnect all loads from the batteries by removing battery cables, opening a
disconnect switch, or switching loads off.
2. Apply AC power to the charger unit. This charger can either work alone to charge batteries
or work with UPS to charge the external batteries. Please follow below charts to install the
charger for different applications.
Stand-alone Charging System
PowerWalker Charger EB Series
Selection
Current
