![background image](http://html1.mh-extra.com/html/powertec/71399/71399_instruction-sheet_1591560001.webp)
Model No. 71399
INSTRUCTION SHEET
Fluting Jig
QUESTION...
1•847•780•6120
WARNING
To reduce the risk of injury, turn router off and disconnect
it from power source before installing and removing
accessories. An accidental start-up can cause injury.
WARNING
For your own safety, read and follow all safety procedures
listed in the router instruction manual.
• Wear proper apparel. Do not wear loose clothing,
gloves, neckties, rings, bracelets or other jewelry which
may get caught in moving parts of the tool.
• Wear safety shoes with non-slip soles.
• Wear protective hair covering to contain long hair.
• Wear eye and hearing protection. Always use safety
glasses. Eye protection equipment should comply with
ANSI Z87.1 standards. Hearing equipment should
comply with ANSI S3.19 standards.
• Wear face mask or dust mask if operation is dusty.
• Be alert and think clearly. Never operate power tools
when tired, intoxicated or when taking medications that
cause drowsiness.
• Keep work area clean. Cluttered work areas and
benches invite accidents.
• Keep children and visitors away. Your shop is a
potentially dangerous environment. Children and visitors
can be injured.
• Use the right tool for your job. Do not force your tool or
attachment to do a job for which it was not designed.
CAUTION
Think safety! Safety is a combination of operator common
sense and alertness at all times when tool is being used.
WARNING
Do not attempt to operate tool until it is completely
assembled according to the instructions.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
PACKAGING CONTENTS
ITEM DESCRIPTION
QUANTITY
A
Dovetail Jig base
1
B
Acrylic router plate
(shown over the dovetail jig base)
1
C
Adjustable fence
1
D
1/4-20 x 5/8" lock knobs
2
E
1/4" washers
2
F
5/16-18 x 1" lock knobs
2
G
5/16" washers
2
H
Fastener Package containing
machine screws of different sizes
(choose the correct screws to be
used on your router)
12
Figure 1
C
B
A
F
G
D
E
H
TOOLS NEEDED
Phillips Head Screwdriver
INTENDED USE
To be used with a plunge router to cut flutes in columns,
molding or furniture parts in stock up to 9-1/2" wide.
RECOMMENDED ROUTER BITS
Core Box Bits
V-Groove Bits
Classic Plunge and Pattern Bits
Straight Bits
Slot Wall Bits