background image

A Division of Snow Joe

®

, LLC

Model 24V-PS1

Form No. SJ-24V-PS1-880E-M

OPERATOR’S MANUAL

© 2019 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

CORDLESS PAINT SPRAYER

24-VOLT MAX* |

 

4.0 Ah

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death. Save all warnings and 

instructions for future reference. 

General Safety 

m

WARNING!

 

When using the paint sprayer basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury. These include:

Work Area Safety

1.  Keep work area clean and well-lit – 

Cluttered, dark 

areas invite accidents.

2.  Keep children, bystanders, and pets away –

 All 

spectators, including pets, should be kept a safe distance 

away from the work area.

3.  Do not operate power tools in explosive atmospheres 

– 

Such as in the presence of flammable liquids, gases, or 

dust. Power tools create sparks which may ignite the dust 

or fumes.

Personal Safety

1.  Stay alert –

 Watch what you are doing. Use common 

sense. Do not operate the paint sprayer when you are 

tired, or under the influence of alcohol or drugs.

2.  Dress properly –

 Do not wear loose clothing or jewelry. 

They can get caught in moving parts. Loose clothes, 

jewelry, or long hair can be caught in moving parts.

3.  Avoid unintentional starting – 

Ensure the

 On/Off switch 

is in the OFF position before inserting the battery

, picking 

up or carrying the tool. Do not carry the tool with your 

finger on the trigger. 

4.  Do not overreach –

 Keep proper footing and balance at 

all times. Proper footing and balance enable better control 

of the cordless paint sprayer in unexpected situations.

5.  Use personal protective equipment – 

Always wear eye 

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

6.  Remove accessories or attachments before turning 

paint sprayer on

.

7.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used – 

Use of dust collection 

can reduce dust-related hazards.

Tool Use and Care

1.  Do not force the tool – 

It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it was designed.

2.  Do not use the paint sprayer if switch does not turn on 

or off – 

Any power tool that cannot be controlled with the 

switch is dangerous and must be repaired.

3.  Disconnect the battery pack from the paint 

sprayer before making any adjustments, changing 

accessories, or storing the paint sprayer – 

Such 

preventive safety measures reduce risk of starting the 

power tool accidentally.

4.  Store idle paint sprayer out of reach of children or 

other untrained persons – 

paint sprayers are dangerous 

in the hands of untrained users.

5.  Maintain the cordless paint sprayer –

 Check for 

misalignment or binding of moving parts, breakage 

of parts, and any other condition that may affect the 

sprayer

's operation. If damaged, have the paint sprayer 

serviced before using. Many accidents are caused by 

poorly maintained tools.

6.  Use the paint sprayer, accessories etc. in accordance 

with these instructions, taking into account the 

working conditions and the work to be performed 

 Use of the paint sprayer for operations different from 

those intended could result in a hazardous situation.

Battery Tool Use and Care

1.  Recharge only with the charger specified by the 

manufacturer – 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

2.  Use this cordless paint sprayer only with Snow Joe

®

 + 

Sun Joe

®

 iON+ 24V series lithium-iON batteries – 

Use 

of other battery packs may create a risk of injury or fi

re. 

Summary of Contents for 24V-PS1





















Reviews: