manualshive.com logo in svg
background image

 

Carter Wall Clock 

OPERATING INSTRUCTIONS 

 
 
BATTERY INSTALLATION 

 

Insert ONE new 1.5 volt “AA” battery (not included) into the battery compartment at the back of clock. Match the 
battery terminals to the polarity markings (+ / -) displayed inside the compartment. 

 

The clock’s movement should start immediately. 

 

Should the clock fail to function properly, confirm that the battery is correctly inserted and if the clock still fails to 
operate, then replace the current battery with a new battery. 
 

Setting the Time: 

 

The Time set dial is located on the back of the clock just near battery compartment. Turn the Time Set dial in the 
direction indicated by the arrow until correct time is reached. 

 

 

Battery Safety Information: 

Do not use rechargeable batteries to power this clock. Do not try to recharge non-rechargeable batteries. Never short 
circuit batteries. Spent batteries must be removed from the clock promptly. To avoid explosion or leakage, do not dispose 
of battery in a fire or attempt to recharge standard or alkaline battery.  Please dispose of battery safely according to the 
battery manufacturers’ instructions or recycle battery per state and local codes.  If battery leakage occurs and any such 
leaked material comes in contact with the skin or eyes, wash immediately with plenty of water.  Battery should be handled 
under adult supervision.  If this clock is not to be used for a long period of time, remove the battery to prevent injury or 
product damage caused by possible battery leakage. 
 
 
 

MOUNTING INSTRUCTION 

 

Hardware Included: 

(1) Anchor

 

(1) Screw

 

 
 
 

Tools Required: 

Philips Screwdriver, Pencil, Stud-Finder 

 

The clock includes one keyhole bracket on the back for wall mounting. 
 
1.  With the help of another person, hold the clock against the wall at a desired mounting location. Using a pencil, mark a 

point on the wall at the top of the clock.  The keyhole position is about 2 inches lower from the top of the clock, so we 
need to remark the point with 2 inches downward to match this position.  Set the clock aside. 
 

Note:

  The hardware included with this item is meant 

for drywall or stud mounting only.   For other wall 
types, please consult your local hardware store for 
assistance in selecting the appropriate hardware. 

Отзывы: