1
pottery barn kids
BELDEN BED
PRE-ASSEMBLY:
Remove all parts and hardware from the box and lay out on a clean carpeted or scratch-free work surface (The shipping
box provides an ideal work surface). This will avoid damaging any parts during assembly. Do not dispose of any contents
until assembly is completed to avoid accidentally discarding small parts or hardware.
Two people recommended for ease of assembly.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to
misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
PARTS INCLUDED:
A – Front panel (1)
B – Back panel (1)
C – Left side panel (1)
D – Right side panel (1)
E - Bottom frame with drawers (1)
F- Slat rolls (1)
G – Drawer fill-in panel (1)
TOOLS REQUIRED:
Phillips head screwdriver (not included)
H – Allen Key (included)
HARDWARE INCLUDED:
I – Allen bolt 1/4”x32x15mm (7)
J – Large Phillips head screw 8x30mm (28)
K – Small Phillips head screw 8x17mm (12)
L – Mending plate 70x40mm (2)
