background image

 

 

Part 1 

 
 
 
 

FCC Notes: 

This  equipment  generates,  uses,  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instructions  manual,  may  cause 
interference  to  radio  communications.  It  has  been  tested  and  found  to  comply  with 
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which 
are  designed  to  provide  reasonable  protection  against  interference  when  operated  in  a 
commercial environment. Operation of this equipment in a residential area is likely to 
cause  interference  in  which  case  the  user  at  his  own  expense  will  be  required  to  take 
whatever measures to correct the interference. 

Warranty Limits: 

Warranty  terminates  automatically  when  any  person  other  than  the  authorized 
technicians opens the machine. The user should consult his/her dealer for the problem 
happened. Warranty voids if the user does not follow the instructions in application of 
this  merchandise.  The  manufacturer  is  by  no  means  responsible  for  any  damage  or 
hazard caused by improper application. 

About This Manual: 

Posiflex has made every effort for the accuracy of the content in this manual. However, 
Posiflex  will  assume  no  liability  for  any

 

technical  inaccuracies  or  editorial  or  other 

errors  or  omissions  contained herein,  nor  for  direct,  indirect,  incidental,  consequential 
or  otherwise  damages,  including  without  limitation  loss  of  data  or  profits,  resulting 
from the furnishing, performance, or use of this material.

 

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims 
any  warranties,  expressed,  implied  or  statutory,  including  without  limitation  implied 
warranties  of  merchantability  or  fitness  for  particular  purpose,  good  title  and  against 
infringement. 
The  information  in  this  manual  contains  only  essential  hardware  concerns  for  general 
user and is subject to change without notice. Posiflex reserves the right to alter product 
designs,  layouts  or  drivers  without  notification.  The  system  integrator  shall  provide 
applicative notices and arrangement for special options utilizing this product. The user 
may  find  the  most  up  to  date  information  of  the  hardware  from  web  sites: 
http://www.posiflex.com or http://www.posiflex.com.tw 
All  data  should  be  backed-up  prior  to  the  installation  of  any  drive  unit  or  storage 
peripheral. Posiflex will not be responsible for any loss of data resulting from the use, 
disuse or misuse of this or any other Posiflex product. 
All  rights  are  strictly  reserved.  No  part  of  this  documentation  may  be  reproduced, 
stored  in  a  retrieval  system,  or  transmitted  in  any  form  or  by  any  means,  electronic, 
mechanical,  photocopying,  or  otherwise,  without  prior  express  written  consent  from 
Posiflex Technology, Inc. the publisher of this documentation. 

©

 Copyright Posiflex Technology Inc. 2011

 

All brand and product names and trademarks are the property of their respective holders. 

P/N:

 19240901050 

CR-4000/6000 SERIES 

CASH DRAWER 

USER’S MANUAL 

                                               

Rev. B0

 

Summary of Contents for CR- 6215











Reviews: