SolarShower 3000 Instruction Manual
1.
OVERVIEW
1.1. The solar pump is designed for outdoor use, the pumpis powered by a solar module. In order to make
the pump work, the solar module needs to be placedin the sun with facingthe sunlight.
1.2. The performance of the pump depends on the sunlit intensity and the position of the solar module.
2.
ASSEMBLING
2.1.Unpack all components carefully
2.2.Unroll the pump cable.
2.3.Connect the two pieces of the solar panel by plug-in the connect cable, adjust the panel bracket to the
right angle.
2.4.Connect the pump to the related solar module.
2.5.Place the pump underwater and make sure that, it is fully immersed in water.
2.6.Choose a hose outlet that you want to see.
2.7.The solar pump is now ready to operate.
3.
CAUTIONS
3.1.Any altering of the product itself or changing of the components is forbidden.
3.2.Do not connect the pump to any AC voltage power, it’s ONLY for DC Voltage power.
3.3.Operate in freshwater only(never above 45
℃
), especially keep away from flammable liquids.
3.4.Do not strike the solar panel.
3.5.Do not let the pump run dry for long time.
4.
CLEANING AND MAINTENANCE
4.1.If after some time the pump starts losing power or stops working, please clean up sediment in the
pumpshell. Please note the pump can be opened by pressing down on the bottom of the filterhousing.
4.2.To clear the impeller, open the pump housingby unscrew the front plastic cover.
*The solar module should only be cleaned with soft tissue or propriety glass cleaning solution.
