background image

Should you encounter a problem with your Polygroup

®

 Product, please DO NOT return the product to the place of purchase. All warranty claims must

be made directly to Polygroup

®

. For any setup and troubleshooting issues, please visit support.polygroupstore.com. Customer Service: 1-888-919-0070.

You may be asked to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup

®

 without a Return

Merchandise Authorization number.

DO NOT RETURN PRODUCT TO STORE

For answers to common questions, setup videos and troubleshooting tips, please visit

support.polygroupstore.com

 or call Customer Service: 

1-888-919-0070

To order parts and accessories,

please visit 

www.polygroupstore.com

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

DISTRIBUTED BY: Polygroup

®

 Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong

Should you encounter any problems, contact Customer Service at 1-888-919-0070 from 8AM to 5PM MST, Monday-Friday.

Extended operating days and hours during peak season requirements.

Manual #

09C3A4USA035

OWNER’S MANUAL

SUMMER WAVES

®

CARTRIDGE FILTER PUMP

FOR ABOVE GROUND SWIMMING POOLS

RP350 / RP400 Models

OWNER’S MANUAL

Summary of Contents for SUMMER WAVES RP350





































Reviews: