background image

Installation Guide 

  TABLE OF CONTENTS 

TABLE OF CONTENTS..................................................1
INTRODUCTION ............................................................2
WHAT’S INCLUDED .....................................................2
INSTALLATION POINTS TO REMEMBER.................2
PS-3085 SH – FEATURES LIST .....................................3
HARNESS DESCRIPTION .............................................4
WIRING DIAGRAM .......................................................6
TRANSMITTER FUNCTIONS .......................................7
THE PROGRAMMING ASSISTANCE BUTTON .........7
PROGRAMMING A TRANSMITTER ...........................7
VALET OPERATION......................................................7

Get INTO Valet Mode ..................................................7
Get OUT of Valet Mode ...............................................8

MULTI-SPEED TACH LEARNING ...............................8
PROGRAMMING OPTIONS ..........................................8
SETTING THE UNIT INTO READY MODE...............10
REMAINING IN READY MODE.................................10
CLUTCH BYPASSING .................................................10
PARKING BRAKE WIRE.............................................11
IDLE MODE ..................................................................11

To activate the Idle Mode ...........................................11

2

nd

 IGN / ACC / CRANK RELAY OUTPUT ................11

PROGRAMMABLE FEATURES..................................11

Lock Pulse Duration ...................................................11
Vehicle Type – GAS or DIESEL................................11
Horn Confirmation......................................................12
SAFE START.............................................................12
TURBO MODE ..........................................................12
To activate the Turbo Mode........................................12

Cold Weather Mode....................................................12
Ignition-Controlled Door Locks .................................12
Smart Ignition Locks ..................................................12
Engine Running Confirmation....................................13
Smart REARM ...........................................................13
Secure Lock ................................................................13
Smart Secure Lock......................................................13
Key Sense ...................................................................13
Starter Disable ............................................................13
Priority Door Access ..................................................13
AUX 2 –Timed Output ...............................................14
Horn Chirp Timing .....................................................15
AUX 3 – TRUNK or Sunroof control ........................15
TRUNK output with DISARM / REARM pulse ........15
Programmable External Trigger .................................15

GROUND OUTPUT ......................................................16
HOME VALET

•

...........................................................16

PANIC MODE (in order to be available, this option must 
be programmed)..............................................................16
MULTI-CAR OPERATION ..........................................16
RESETTING THE MODULE........................................16
EVENTS LOGGING and PLAYBACK.........................17

Start Failure Codes via Parking Lights: ......................17
Events playback:.........................................................17

DIAGNOSTICS - PARKING LIGHTS FLASH RATE.17
TESTING .......................................................................18
CLOSING UP.................................................................18

NOTICE:

DUE TO THE POTENTIAL FOR DAMAGE TO THE VEHICLE, THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY 
ELECTRICAL DAMAGE TO THE VEHICLE OR TO THE UNIT THAT HAS CAUSED VEHICLE DAMAGE DUE TO IMPROPER 
INSTALLATION OF THE PRODUCT.   
THIS UNIT MUST BE INSTALLED BY AN AUTHORIZED POLARSTART TRAINED TECHNICIAN USING ALL SAFETY 
DEVICES SUPPLIED.  

Please review the Installation Guide carefully before any work begins. 

WARNING

THIS UNIT IS DESIGNED FOR VEHICLES WITH A MANUAL TRANSMISSION ONLY: BEFORE INSTALLING THE UNIT, TEST 
THAT THE OEM DOOR SWITCH CONTACTS OF THE VEHICLE WORK WELL, AND THAT THE PARKING BRAKE SYSTEM 
OPERATES PROPERLLY. 

DO NOT INSTALL ON CONVERTIBLE VEHICLES UNLESS A MOTION DETECTOR IS USED. 

Rev: 1.00 – GL 29/Nov/01 Manufactured in Canada by POLARSTART 

POLARSTART 

PS-3085 SH 

Multi-Channel Remote Starter System 

for MANUAL Transmissions

Summary of Contents for PS-3085 SH



















Reviews: