background image

Product Manual

THIS MANUAL SHOULD BE HANDED OVER

AND KEPT BY THE SERVICE DEPARTMENT

AFTER THE INSTALLATION!

Thank you for buying a PlymoVent product.

Before you unpack and put it into operation please

read this product manual and follow the instructions.

EUSA/CAN
010228

Technical description ...................................... 2
Delivery ........................................................ 2
Advantages .................................................. 2
Technical data ................................................. 2
Design and function .......................................... 3
Handling ......................................................... 3
Hood operation ................................................ 3
Mounting example ............................................ 3
Working radius ................................................ 3
Pressure loss ................................................... 4
Alternative system layouts .................................. 5
Complementary products and accessories .............. 6
Mounting instruction .................................... 7 - 10
Maintenance instruction ............................... 11-12
Spare part drawing ..................................... 13-16

Table of contents:

page:

PlymoVent Corp.
375 Raritan Center Parkway,
Edison New Jersey 08837, USA
Tel: +1 (732) 417 0808
Fax: +1 (732) 417 1818

PlymoVent Canada Inc.
6615 Ordan Drive, Unit # 3
Mississauga, Ontario L5T 1X2, Canada
Tel: +1 (905) 564 4748
Fax: +1 (905) 564 4609

Summary of Contents for MULTISMART ARM MSA-125-3

















Reviews: