1. Verify the Contents Inside the
Package Box
The package should contain the following items plus
HDP-1100PT. If any item is missing or damaged, please contact
the seller immediately.
Quick Installation Guide
Plastic Wall Mount
Metal Wall Mount
Screw Kit
2. Physical Specifications
Dimensions (W x D x H)
114 x 35 x 114 mm
Weight
290g (gross weight)
Real Panel
CMOS Sensor
Speaker
Call Button
Microphone
White LED
Interface
Description
CMOS
sensor
The HDP-1100PT door phone has a built-in IP
camera supporting a high-resolution video of up
to 1280 x 720 pixels.
White LED
Emits white light to provide light source in dark
places.
Call button
Press the “Call” button to check who the caller is
before opening the doors, or talk to him/her.
Microphone
The door phone has a built-in microphone hidden
in the pinhole located on the front panel.
Speaker
The door phone has a built-in speaker for
convenient communication and alert use.
I/O Control Instruction
Electric deadbolt for
door entry system
Connect to
RJ45 cable
Green: NO
Brown: COM
Blue: NC
Orange: DI
Yellow: DI
Black: GND
Red: +DC12V
Interface
Description
DC Power (red)
The input power is 12V DC, 1A
DI
(orange and yellow)
DI connects to the sensor for notifying
the status, so that the CPU can do the
appropriate action.
DO
(green, brown and
blue)
DO connects to control device and the
status of device can be accessed (NC-
COM) or (NO-COM). The PCB controls
the power On/Off status of device via
power relay.
3. Wall Installation
Step 1:
Surface-mount the HDP-1100PT SIP IP video door
phone in a desired location.
Step 2:
Put the Ethernet cable through the square hole,
measuring 35 x 35mm.
120mm
82mm
127mm
95mm
Roof
Panel
35mm
Step 3:
Fix the door phone on the wall using a roof or a panel
and two screws as shown below:
Step 4:
Connect the HDP-1100PT to POE switch or router via
R45 cable.
