Quick Installation Guide for Ethernet Lightning Arrest Box
Thank you for purchasing PLANET Ethernet Lightning Arrest Box ELA-100, the Eth-
ernet Lightning Arrest Box package shall contain following contents:
Check the contents of your package for following parts:
Ethernet Lightning Arrest Box x1
Quick Installation Guide x1
Ground cable x1
If any of these pieces are missing or damaged, please contact your dealer imme
-
diately, if possible, retain the carton including the original packing material, and
use them against to repack the product in case there is a need to return it to us
for repair.
Please refer to following procedure and picture to install the Ethernet Lightning
Arrest Box between two Ethernet devices.
Step 1:
In the right side, please use ground cable from package to connect the screw
and ground.
Step 2:
Please connect first Ethernet device to the protected port that near the screw
through the UTP cable.
Step 3:
Please connect second Ethernet device to un-protected port from other
side of Ethernet Lightning Arrest Box.
