DAP3 PART #:
DAP3BB-S0
DAP3BC-00
DAP3BC-00-55
DAP3BC-S0
DAP3BC-S0-4
DAP3BC-S0-5
DAP3BC-S0-55
DAP3BC-S0-5U
DAP3BC-S0-6
DAP3BC-S3-4
DAP3BC-S3-5
DAP3BC-S3-6
DATA ACCESS PORT
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2019
B21102
Rev: 00 3-2019
Data Access Ports (DAP), provide end users a safe and secure means to maintain and
monitor performance of PLCs, VFDs, and industrial networks.
Integrated security features shall prevent the disruption of service or unwanted
access by unauthorized personnel. Non-arc flash certified personnel can access networks
within the panel which reduces cost, increases efficiency, and promotes overall safety.
Furthermore, the new, innovative circular design allows for quick and easy installation.
NOTE: In the interest of higher quality and value, Panduit products are continually
being improved and updated. Consequently, pictures may vary from the
enclosed product.
NOTE: Updates to this Instruction Manual may be available.
Check www.panduit.com for the latest version of this manual.
TO REDUCE THE RISK OF INJURY, USER MUST READ
INSTRUCTION MANUAL
Safety Information
Failure to comply with the warnings and
information in this manual could result in
product failure, electrical shock, severe
injury or death.
Warning
• Always de-energize power before accessing an electrical enclosure.
• Always follow safety and lockout/tagout procedures when working on or near electrical
systems and equipment.
• Use proper personal protective equipment (PPE) when working around sources of
hazardous electrical energy.
• Do not use this product outside of the specified performance and environmental limits.
• This product must be installed by a qualified worker.
• Always comply with local installation codes and standards.
Information de Sécurité
• Toujours éteindre l'alimentation électrique avant d'accéder à un boîtier électrique.
• Suivez toujours les procédures de sécurité et de verrouillage / étiquetage (lockout/tagout)
quand vous travaillez sur ou à
proximité de systèmes et d'équipements électriques.
• Utilisez un équipement de protection individuelle approprié (EPI) lorsque vous travaillez
autour de sources d'énergie électrique dangereuse.
• N'utilisez pas ce produit en dehors des performances spécifiées et des limites
environnementales.
• Ce produit doit être installé par un ouvrier qualifié.
• Respectez toujours les codes et les normes d'installation locaux.
Page: 1 of 2
© Panduit Corp. 2019
INSTALLATION INSTRUCTIONS
DAP
Shown: DAP3BC-G3-5
Shown: DAP4BC-G3-5
DAP4 PART #:
DAP4BB-G0
DAP4BC-G0
DAP4BC-G0-4
DAP4BC-G0-5
DAP4BC-G0-5U
DAP4BC-G0-6
DAP4BC-G3-4
DAP4BC-G3-5
DAP4BC-G3-6
DAP4BC-X0
Technical Specifications
Warning:
Do not use this product outside of the specified performance and environmental
limits. Failure to comply with these specifications could result in product failure,
personal injury, or death.
Standards
UL 50E
ENCLOSURES FOR ELECTRICAL EQUIPMENT,
ENVIRONMENTAL CONSIDERATIONS
UL 50
ENCLOSURES FOR ELECTRICAL EQUIPMENT,
NON-ENVIRONMENTAL CONSIDERATIONS
CSA C22.2 NO. 94.1
ENCLOSURES FOR ELECTRICAL EQUIPMENT,
NON-ENVIRONMENTAL CONSIDERATIONS
CSA C22.2 NO. 94.2
ENCLOSURES FOR ELECTRICAL EQUIPMENT,
ENVIRONMENTAL CONSIDERATIONS
UL 508A
STANDARD FOR INDUSTRIAL CONTROL PANELS
CSA C22.2 NO. 14-13
INDUSTRIAL CONTROL EQUIPMENT
IEC 60529
DEGREES OF PROTECTION REQUIRED BY ENCLOSURE
Application
Degree of Protection
For Flat Surface Mounting in a TYPE (UL, NEMA and CSA)
4, 4X, 12, 13, IP65 and IP66 Enclosures.
www.panduit.com
Technical Support:
1-800-777-3300
Email: [email protected]
