background image

1

<DRC1087>

En

CD-ROM DRIVE UNIT
UNITE DE LECTEUR DE CD-ROM
CD-ROM –LAUFWERK
LETTORE DI CD-ROM

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

IMPORTANT

WARNING

:

 TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT NOTICE:

RECORD THE MODEL NUMBER

AND SERIAL NUMBER OF THIS

E Q U I P M E N T   B E L O W .   T H E

NUMBERS ARE ON THE TOP

PANEL.

MODEL NO.        DR-U16S

SERIAL NO.

KEEP THESE NUMBERS FOR

FUTURE USE.

BUSY

PHONES

CD-ROM  DRIVE

DR-U16S

Operating instructions

Mode d'emploi

Bedienungsanleitung

Istruzioni per l'uso

The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

English

CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).  NO USER-
SERVICEABLE PARTS INSIDE.  REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

Français

Deutsch

Italiano

Summary of Contents for LaserMemory DR-U16S






































































Reviews: