Installation
<ENGLISH>
Note:
•
Before finally installing the unit, connect the
wiring temporarily, making sure it is all connect-
ed up properly, and the unit and the system work
properly.
•
Use only the parts included with the unit to
ensure proper installation. The use of unautho-
rized parts can cause malfunctions.
•
Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.
•
Install the unit where it does not get in the dri-
ver’s way and cannot injure the passenger if there
is a sudden stop, like an emergency stop.
•
If installation angle exceeds 30° from horizontal,
the unit might not give its optimum performance.
Installation with the rubber bush
182
53
Holder
After inserting the holder into the dashboard,
then select the appropriate tabs according to
the thickness of the dashboard material and
bend them. (Install as firmly as possible
using the top and bottom tabs. To secure,
bend the tabs 90 degrees.)
Rubber bush
Screw
Dashboard
30
°
Removing the Unit
Insert the supplied extraction keys into the
unit, as shown in the figure, until they click
into place. Keeping the keys pressed against
the sides of the unit, pull the unit out.
Frame
Pull out to remove the frame.
(When reattaching the frame, point the
side with a groove downwards and
attach it.)
INST
ALLA
TION MANUAL
СУК
О
УСОК
<99I00F0P01>
KEH-P6910R
Printed in Thailand
о лд
<CRD3116-A/N> EE
This product conforms to new cord colors.
оод о дл о .
