-1-
DGS
Installation Instructions
Инструкция по установке
Instrucciones de Instalación
הנקתה תוארוה
English,
Русский, Español,
תירבע
1 220VAC Adapter
2 Yellow LED
3 Red LED
4 Green LED
5 Test/Silence Button
6 Ventilation Slots
7 Mounting Bracket
8 Battery Compartment (Back Side,
Bracket Removed)
1 Блок питания 220В AC
1 Adaptador 220VAC
חכ קפס
220V AC
1
2 Желтый светодиод
2 LED Amarillo
הבוהצ תירונ
2
3 Красный светодиод
3 LED Rojo
המודא תירונ
3
4 Зеленый светодиод
4 LED Verde
הקורי תירונ
4
5 Кнопка Тест/Прерывание звукового
сигнала
5 Botón para Prueba/Silencio
הקתשה/הקידב רותפכ
5
6 Вентиляционные отверстия
6 Ranuras de ventilación
רורווא יצירח
6
7 Кронштейн
7 Soporte de montaje
יאלגה הלתמ
7
8 Батарейный отсек (расположен сзади,
доступен при снятом кронштейне)
8 Compartimento de la batería (en la parte
posterior de la unidad sin el soporte de montaje)
,ירוחא דצ( תוללוס את
)הלתמה אלל
8
DGS Wireless Gas Detector
The DGS is a FastLink technology wireless indoor gas detector, designed for the
FORCE series
and
VISION
intruder alarm systems. Using
the DGS in
FORCE
requires the installation of a wireless receiver.
The fully supervised DGS detector can detect the presence of Liquefied Petroleum Gas (LPG), and wirelessly alerts the control panel.
LPG includes propane gas (C3H8), mainly used as fuel in heating appliances, cooking equipment, and vehicles.
The detector monitors the presence of gas once every 10 seconds and performs a self-test every 160 seconds. Once the concentration
of the gas reaches the detection threshold, it triggers an alarm, by sounding beeps every one second, along with the red LED flashing.
The DGS is powered by a 220V AC transformer, which connects with a micro USB cable (included). The detector’s battery is only used
for monitoring and alerting on AC power loss.
The DGS alerts on low battery condition, and has a tamper switch that alerts when its enclosure is opened or removed from the wall.
For enrollment information, see the alarm system’s Installation guide.
Cautions:
The DGS’s backup battery only purpose is to monitor if AC power is loss. The detector does
not detect or alert on gas leak without AC power!
The DGS is based on wireless (RF) transmissions. Any wireless transmission can be subject
to RF interference and, although unlikely, this interference may cause the DGS to not operate
as intended. RF transmissions will be attenuated by tinted glass, in wall isolation with metal
foils, metal objects, etc.
2 3 4
7
6
8
5
1
