MX7
12 channel range
54-216 MHz (TV 2-13)
Separator enables selection of up to
7 non-adjacent VHF channels (3 low-
VHF and 4 high-VHF channels) from
multiple off-air TV antennas for best
picture quality mix-and-match system
flexibility
Combiner mixes up to 7 non-adjacent
VHF channels (3 low-VHF and 4 high-
VHF channels) from single channel
off-air antenna sources into a composite
output for headend insertion
10dB per channel attenuation control
provides easy level balancing
Low 2.5dB insertion loss provides
optimum carrier-to-noise for improved
picture quality
Compatible with both analog and digital
signals to provide format flexibility
Factory custom-tuned for quick and
easy installation saving time and
money
Field re-tunable enables quick and
easy channels reconfiguration with
minimum test equipment
Cost effective solution for MATV and
SMATV applications
Compact wall-mount design requires
less space for easier installation and
servicing
The Pico Macom MX7 low loss 7-channel mixing network is an extremely cost
effective splitting or combining network for use in smaller MATV and SMATV
systems. The user friendly and compact design facilitates easy installation.
Individual channel tuning and attenuator controls provide accurate quick-and-
easy setup or reconfiguration reducing system down time. The MX7 used as a
separator significantly reduces system harmonics when used prior to a series of
Pico Macom’s XBS single channel strip amplifiers or signal processors. The
MX7 used as a combiner is the perfect filtration system to be used when
combining outputs from channel specific VHF antennas before insertion into
a cable system via Pico Macom’s TA52 broadband amplifier, thus reducing
harmonic distortions.
Passive 7-Channel VHF Separator-Combiner
Passive 7-Channel VHF Separator-Combiner
www.picomacom.com
DISTRIBUTION
Passive Components
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
C-19
Rev. 12/02
MX7
