Sleep
mode
Allergen index from 1 to 12
where 1 indicates best air quality
3-digit display
PM2.5 / IAI
PM2.5
indicator
WiFi
indicator
Gas
indicator
Allergen index
indicator
MicroCube DI DACH_EN
90x127mm
When display shows F0
When display shows A3
When display shows C7
Maintenance
Time to clean the pre-filter
Time to replace NanoProtect filter
Series 3
Time to replace NanoProtect filter
Active Carbon
Turbo
speed
Filter replace
alert
Speed 3
Speed 2
Speed 1
Pre-filter clean
alert
Allergen
mode
Bacteria &
Virus mode
NanoProtect filter
Series 3 x 2
NanoProtect filter
Active Carbon x 2
Pre-filter x 2
2
2
1
1
3
4
3
4
press for 3 seconds to reset after cleaning or replacing accessory
!
Good
Poor Very poor
Fair
Connectivity
Fan
speed
Power
Auto
mode
Filter
reset
Child
lock
Light
dim
Control
Hold for
3 seconds
Hold for 3 seconds to
switch mode:
PM2.5 / IAI /GAS
Sleep
Speed 1~3
Turbo
Display
Air quality
ring
4241 210 94514-1
The filter may produce smell after being used for a while because of the
absorption of indoor air. Remove the filter and place it where it has direct sunlight
and ventilation for several hours. Re-install and try using it again. If the odor
remains, please replace the filter.
General
mode
Clean Home+
Open the app and click on "Connect a New Device" or
press the "+" button to connect your device
.
Please follow
the steps in the app.
You can use the app to control the purifier and check air
quality
.
Download and install the Philips app
1
2
