background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

  

Rechargeable 

shaver

HQ6764

CoolSkin

03/02

PRODUCT INFORMATION

-  This product meets the requirements regarding 

interference suppression on radio and TV.

-  After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

-  Input voltage 

:  100-240 V, 50/60 Hz

-  Power consumption 

:  max. 7 W

- Motor voltage 

: 2.4 V  

-  Battery 

:  2x NiMh AA

-  Battery capacity 

:  approx. 1100 mAh

-  Charging indicator 

:  1x duoLED green / red

 

:  charge - full / battery low

-  Charging time 

:  approx. 1 hour

-  Charging current 

:  1000/40 mA temp. dependent

-  Charging device 

:  HQ600 external transformer

-  Shaving heads 

:  HQ167 - 4222 036 04250

-  Shaving emulsion 

:  HQ160 shaving emulsion

 

:  HQ161 fresh gel

- Mains shaving 

: no

- SAP coding 

: HQ6764

DISASSEMBLY- AND  RE-ASSEMBLY ADVISE

-  Remove the shaving unit to prevent damage during repair.
-  Remove the outer cover (item 27) and cartridge (item 28).
-  Remove 5 A1 screws.

REPAIR INSTRUCTION

-  After the cover (item 16) has been removed, it must be 

checked if its sealing has not been damaged.

-  The cover (item 16) contains a sticker that is permeable 

to gas yet impermeable to water.
This sticker may not be removed under any circumstances.

-  Unsolder the motor connector and remove the PCB.
-  To replace the motor (item 10) or the driving unit (item 6), 

screws B1 must be removed first.
Then push the entire unit out of the housing (item 12) and 
check if its sealing is damaged.

-  The entire driving unit (item 6) is supplied as a single part 

to guarantee optimal sealing of the gear shafts.

-  A replacement of the pump button (item 22) is only 

possible after removal of the hair chamber (item 5).

-  To guarantee that the shaver is completely watertight, only 

the original screws may be used.

-  To charge the shaver only the original HQ600 power plug 

may be used.

OPTIONAL (accessories)

-  No specific issues

Reviews: