![background image](http://html.mh-extra.com/html/philippi/vsr-200/vsr-200_instruction-manual_1538057001.webp)
k
V S R 2 0 0
V2.2 - APR 2014
philippi elektrische systeme gmbh
www.philippi-online.de
Neckaraue 19 [email protected]
D-71686 Remseck am Neckar Telefon: +49 (0)7146/8744-0, Fax -22
USE
The VSR 200 is a voltage-dependent switching isolating relay. It is used for automatic Inter-
connection of two battery groups (e.g. starter / consumer battery or starter / bug battery)bat-
tery) in charging mode.
The VSR 200 measures the voltage of both battery groups at the connection bolts and swit-
ches them together as soon as the voltage at one of the two battery groups is above the
switch-on threshold. If the charging equipment (alternator, chargers, wind / solar) stops sup-
plying energy, the voltage drops and the relay automatically disconnects the two battery
groups as soon as the voltage falls below the switch-off threshold. In addition, the battery
banks can be disconnected during the starting process.
The VSR 200 can be activated in an emergency by manual operation at the relay or by an
optional control button to establish a connection between the battery groups in order to
select the motor from both batteries (emergency start function).
The VSR 200 is designed for continuous currents up to 200 A and has a very low self-cur-
rentconsumption.The voltage-dependent switching isolating relay VSR 200 can only be ope-
rated on DC low voltage 9 - 32V.
It is designed for use on yachts or in mobile homes and may only be used in closed rooms
that are protected from rain, humidity, dust and condensation water. Never use the voltage-
dependent switching isolating relay VSR 200 in places where there is a risk of explosion due
to gas or dust. It is not suitable for outdoor installation.
INSTRUCTION MANUAL