After Sales Support (GB) 0845 757 3479 (IRE) 1890 812 721
P a g e
1 of 3
HD Portable Satellite System SM00575 / 82985
Satellite list / Channel list UPGRADE procedures – Internet Webpage download
Note: You will need a USB memory stick or portable
flash drive / hard disk (Removable Disk))
1.
Before switching on your satellite system
2.
Download the file from the webpage by left clicking on the file
UPG_DG_180327.ddf
3.
Open the USB stick / storage device and copy the downloaded file onto the USB stick file (Root
path / flash drive/portable hard disk (Removable Disk)) (Do not copy into a folder or Directory)
4.
Making sure your satellite system is off
5.
Plug the USB storage device into the receiver (Right hand side). And then turn on the Satellite
receiver.
6.
On the Remote Control press the [MENU] key then looking at the left hand side of the screen
push the down arrow key [v] (Below OK Button) to highlight the ‘Tools’ Icon.
7.
Press the right hand key [>] (Next to OK Button).
8.
Then use down arrow key [v] (Below OK Button) to highlight the Upgrade by USB option, press
the [OK] Key.
9.
Use the Left [<] and Right Key [>] (Either side of the OK Key) to set the Upgrade Mode option
to indicate ‘DDF’.
10.
After the confirmation that the file name shown is correct then press “Start” to initialize the
upgrading procedure. Please refer to the three photographs below.
