Introduction
MT4032 is a cutting-edge camera built-in a pen. You can
take pictures, save video fi les with sound, use it as a we-
bcam in Skype. Files are stored on microSD fl ashcard, you
can download them directly from fl ashcard or through
pen connected by USB cable.
Note! Before fi rst use fully charge the device.
Charging
Unscrew the pen in half of its length. Use included USB
cable to plug it to USB port in PC computer. During charg-
ing red LED is blinking, when fully charged red LED is on
constantly. After charging unplug USB cable and screw
together both parts.
Installing microSD card
Unscrew the pen in half of its length. Put microSD into card
slot, note that fl ashcard connection pins should facing
mini USB port. Now screw together both parts.
Using pen
To make notes twist on silver ending of pen, after use twist
off to hide pen inside.
Switching modes
Press and hold ON/OFF button for about 2 sec, green LED
indicator will be on constantly. Device is now in snapshot
mode.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink 3 times. Device is now in video
mode and will record video fi le instantly.
Next press and hold ON/OFF button for about 2 sec, green
LED indicator will blink once and go off . Device is now in
off mode.
Note! If no action is taken within 30 sec from switching
mode the device will automatically go to off mode.
Taking pictures
When device is in snapshot mode press shortly ON/OFF
button. Every time you press it the device is saving picture
on microSD card.
Recording video
When you have switched from snapshot mode to video
mode the device will record video instantly. To stop record
press shortly ON/OFF button. To start recording next video
fi le press again ON/OFF button - green LED indicator will
blink 3 times to confi rm recording next fi le.
Connecting to PC computer
Data storage mode
When MT4032 is in off mode unscrew the pen and con-
nect it to the PC computer using USB cable included in
package. System will automatically install the device as an
USB mass storage device. You can copy all fi les from pen to
windows desktop. During data transfer green LED indica-
tor is blinking.
Webcam mode
Insert software disk into CD-ROM drive and run driver in-
stallation. When fi nished turn MT4032 into on mode and
plugged to PC using USB cable. Windows will install new
capture video device. In webcam mode only video is ena-
bled, microphone function is disabled – use external input
audio device for skype calls.
Setting data and time
To set actual date and time you need to copy fi le “time.txt”
to root folder of MT4032 in data storage mode. Copy “time.
txt” from software disc to desktop and edit in windows
notepad. File contains only one line as below:
2009.01.01 12:01:01
Modify this line to actual date and time, save it, and then
copy into root folder of MT4032 in data storage mode.
Next unplug USB cable and wait until LED indicator goes
off . Now turn on MT4032 – new time settings will be ap-
plied.
Reset
If you encounter strange behavior of the device you can
put straighten paper clip into “reset hole” to restart the
device.
Note! If there is no available space for recording red
and green LED indicator will fl ash at the same time.
After 5 sec device will stop recording and switch into
off mode.
Note! If red and green LED indicator is blinking alter-
natively – you need to recharge the device. After 5 sec
device will stop recording and switch into off mode.
Reset
If you encounter strange behavior of the device you can
put straighten paper clip into “reset hole” to restart the
device.
Note! If there is no available space for recording red
and green LED indicator will fl ash at the same time.
After 5 sec device will stop recording and switch into
off mode.
Note! If red and green LED indicator is blinking alter-
natively – you need to recharge the device. After 5 sec
device will stop recording and switch into off mode.
PENCAM
User
’
s
ma
nu
a
l
Live Recording in Every Situation
MT4
03
2
EN
ON/O
FF
Camera
Microphone
U
SB
Port
Card
s
l
ot
I
ndicator
Reset
b
u
tton
S
etti
ng
data
a
n
d
time
I
nsta
ll
microSD
card
into
de
v
ice
and
p
lu
g
it
to
PC
com
-
p
u
ter
v
ia
U
SB
cab
l
e.
When
de
v
ice
is
set
to
“
data
storage
”
mode
yo
u
wi
ll fi
nd
“
time.txt
” fi l
e
in
the
root
fo
l
der.
U
se
Windows
notepad
to
edit
this
fi l
e
and
enter
v
a
l
id
date
and
time.
Sa
v
e
fi l
e
, u
np
lu
g
U
SB
cab
l
e
and
wait
1
min.
Now
power
on
de
v
ice
again
–
new
date
and
time
settings
wi
ll
be
stored.
Webcam
mode
Tu
rn
M
T4
032
into
on
mode
and
p
lu
gged
to
PC
u
sing
U
SB
cab
l
e.
Windows
wi
ll
insta
ll
new
capt
u
re
v
ideo
de
v
ice.
I
n
webcam
mode
on
l
y
v
ideo
is
enab
l
ed
,
microphone
f
u
nc
-
tion
is
disab
l
ed
– u
se
externa
l
inp
u
t
a
u
dio
de
v
ice
for
skype
ca
ll
s.
