![background image](http://html.mh-extra.com/html/pax-technology/a980/a980_quick-start-manual_1513233001.webp)
PAX TECHNOLOGY INC.
Contents
Qty.
A920 POS Terminal
1
Paper Roll
1
Power Cord
1
Power Adapter
1
Please check the components after unpacking. If any of
the components are missing, please contact the dealer.
Contents Checklist
1
Product Description
2
EMV Reader
Power Button
Front Facing
Camera
Magnetic Stripe
Reader
Contactless Area
LCD Screen
Contactless Area
MAC Address
Label
5MP Rear Camera
Optional Base
POGO PINS
Battery Cover
Hatch
Power Button
Volume -
USB Type-C Port
Printer Hatch
Note:
Product images shown may be different than actual
product recieved.
Power
4
3
SAM, SIM, & Micro SD Card
1. Remove the back cover.
2. Gently remove the battery from the device.
3. Insert the card into the relevant card slot.
4. Replace the battery and back cover.
POWER ON:
Press and hold the power button down for 3-5 seconds
and then release.
POWER OFF:
Press and hold the power button down for 3 to 5
seconds and then release.
•
Do not use or place the battery in direct sunlight
and/or smokey, dusty environments.
•
Do not strike, squeeze, and/or tread on battery.
•
Do not throw the battery in any liquids or place in/
near fires.
•
If the battery is deformed or damaged, please stop
using immediately and replace it.
•
If the continuous working time is only half of a new
battery, the battery life may be at its end. Please
replace it.
•
The specified battery model and charger must be
used, otherwise there may be an explosion.
•
The charging time cannot exceed 24 hours. If the
battery is out of power, please recharge in an
appropriate time and then disconnect the device.
•
Please recharge the battery at least once every 6
months to avoid shortening its life.
•
Replace battery every two years.
•
Be sure to follow the instructions to dispose of
wasted batteries.
5
Lithium Ion Battery
Product Description CONT’d
2