background image

PawTrax® TAGZ™ Userguide 

 

Step 1 – Activate and top up sim 

 
Following the attached guide, activate and top up the sim. Unless you have chosen to supply 
your own sim, the sim card will be pre-installed in your TAGZ. The mobile number allocated to 
the sim is the number of your TAGZ. 

 
Step 2 – Charge TAGZ 

 
Fully charge your TAGZ using the supplied charger and charger clip. The light on the charger 
will change from red to green when fully charged. Once you have set up your admin number 
(see step 3 below) you will also receive a “fully charged” sms from the TAGZ.  
 

Step 3 – Set Up your TAGZ 

 
Send the following three sms messages to the TAGZ. Wait for confirmation sms from each 
before sending the next message. You can use the optional 3

rd

 party Android/iOS app to send 

the commands if preferred. 
 

admin,123456,1,***********

 (substitute * with your mobile number – must be in international 

format eg +447759130866) – this number receives ‘low’ and ‘charged’ battery sms messages 
 

apn,123456,giffgaff.com 

– or 

apn,123456,mobiledata

 (if using the roaming sim) - it can 

take anything between 30 mins and a few hours before it appears on the map when first 
changing the APN 

 
ip,123456,40.76.223.171,9393 
 

Step 4 – Operating your TAGZ 

 

Locate Mode (Mode 0) – max operation time (sends location as sms to your mobile on 
request) 

 
Send the TAGZ the sms    

mode

,

123456,0

 

 
You can then request a location at any time by sending the sms       

url,123456 

 

TAGZ must have clear view of the sky to get a GPS fix. The TAGZ will send its location as a 
Google map link. If it cannot get a fix it will send back last known location. Check the 
timestamp in the message. 

 
 
Tracking Modes via optional web platform (Modes 1 or 6) 

 

Mode 1 

 
Send sms    

mode,123456,1 

 

GPS Chip is off and wakes up at user defined intervals – default is 30 secs, and 
transmits location to platform 
 
To change update interval send sms   

interval,123456,

60

,

600

 (where 

60

 is time in 

seconds when TAGZ moving and 

600

 is time in seconds when not moved for  >10 

mins)  . 

Always resend interval setting after changing modes 

Summary of Contents for TAGZ

Page 1: ...ceives low and charged battery sms messages apn 123456 giffgaff com or apn 123456 mobiledata if using the roaming sim it can take anything between 30 mins and a few hours before it appears on the map when first changing the APN ip 123456 40 76 223 171 9393 Step 4 Operating your TAGZ Locate Mode Mode 0 max operation time sends location as sms to your mobile on request Send the TAGZ the sms mode 123...

Page 2: ... for BST Interval Set update interval Mode 1 only Interval password m n Set interval OK Interval 123456 60 600 m interval when moving n interval when not moved for 10 mins Password Change password password old password new password Password 123456 456789 default is 123456 APN Set APN Apn password apn user password Set apn ok apn 123456 giffgaff com giffgaff password IP Set IP Port ip password ip n...

Page 3: ...tandby sms mode 0 and request a location ad hoc to be sent to your mobile When tracking is required send the appropriate sms message to turn on mode 1 or 6 then set the desired update time for live updates to the optional web tracking platform Mode 6 turns GPS chip to always on and is the most power hungry but gives best chance of getting a GPS fix in poor conditions If when in mode 0 the TAGZ can...

Page 4: ...gh the TAGZ is waterproof please avoid contact with salt water We supply you with some rubber bands which are used to protect the charging pads from water and mud etc These can also be used to attach the TAGZ to the collar should you prefer not to have it hanging from your dogs collar They also act as a silencer should your TAGZ be next to your dogs ID disc ...

Reviews: