//code.Node Cart
| PS-3235
Quick Start Guide
012-16934A
Note:
Additional information on how to use the //code.Node Cart
can be found in the SPARKvue and PASCO Capstone Help.
What's Included
//code.Node Cart
Required Equipment
• //code.Node (PS-3231)
Experiments
Print-ready experiment worksheets are available to download from the
PASCO website. Go to pasco.com/freelabs and enter
PS-3235
in the
Part No.
field to access all experiments related to the //code.Node Cart.
Software Help
Additional information on how to use the //code.Node Cart can be found
in the PASCO Capstone and SPARKvue Help.
SPARKvue
Click
then select Help.
PASCO Capstone
In the menu bar, click Help then select PASCO Capstone Help.
Features
1
2
4
5
6
3
Insert a //code.Node
1. Insert the top side of the //code.Node into the cart bay face up.
2. Press down on the bottom side of the //code.Node until it snaps in
place.
To remove the //code.Node from the cart, gently pull back the release tab
on the cart and push the //code.Node out of the cart using the hole on the
bottom of the cart.
Axle Magnet
For measuring the cart's
motion using the //code.Node
Magnetic Field Sensor.
1
//code.Node Bay
For inserting a //code.Node.
2
Release Tab
For releasing the //code.Node
from the cart.
3
Threaded Hole
For attaching bumpers from
the ME-9884 Bumper
Accessory Set.
4
String Tie (front and rear)
For attaching a string to pull
the cart.
5
Mass Bay (4 total)
For inserting masses from the
ME-8984 50-g Mass Set.
6
