background image

TM

 1

916x/926x T1 Access Mux
Quick Reference

Document Number 9161-A2-GL10-10

December 1998

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com
Select 

Service & Support 

 Technical Manuals 

 T1 Access Multiplexers.

Select the following document:

9161-A2-GH30

Model 916x/926x T1 Access Mux Technical Reference

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Overview

This quick reference summarizes the configuration options accessed when you select
Configuration from the Main Menu. Not all options are available, but are filtered
depending on what other options have been selected. Refer to Chapter 5, 

Setting Up

,

in the 

Model 916x/926x T1 Access Mux Technical Reference 

for more information.

Summary of Contents for 9161 Single T1
















Reviews: