Page 1 of 2
(A)
Pedestal Base
(B)
Buttonhead Screws
(C)
Panel Assembly
Single Pedestal
Figure 1
Double Pedestal
Figure 1
(C)
Panel Assembly
(B)
Buttonhead Screws
(A)
Pedestal Bases
Figure 2
Button Head
Screw
Figure 3
As soon as your shipment arrives inspect all pieces
and assembly components to make sure your delivery
is complete.
A. Pedestal Leg(s)
B. Buttonhead Screws (Figure 2)
C. Panel Assembly
D. 5/32” Hex Head Wrench
Assembling and installing a Pannier Exhibit Base is a
straightforward process made even easier if two or
more people work together using the proper tools and
materials to complete the task.
• Power or manual post-hole digger
• Shovel
• Wood braces
• Hammer
• Clamps
• Nails
• Plastic sheeting
• Cement
• Gravel
• Tamping bar
• Level
All you need to do is attach the exhibit pedestal leg(s) to the
completed panel assembly with the supplied buttonhead screws as
shown in Figure 3. Proceed to Step 3 – Installation.
If you received your exhibit panels from Pannier, most
of the assembly has already been completed for you.
Recommended tools and materials:
Step 1 – Inspect and Organize
For each exhibit base, the following will be
included: (Figure 1)
Installing a Pannier exhibit base is as easy as 1, 2, 3.
Step 2 – Assembly
For use with
the following
exhibit bases:
Assembly and Installation
Instructions
Pannier Exhibit Base
Single Post Frameless Double Post Frameless
REV 10.20.17
