![background image](http://html1.mh-extra.com/html/panduit/sdlock-series/sdlock-series_installation-instructions_3458989001.webp)
© Panduit Corp. 2018
INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029PV
Page 1 of 2
Swing Handle Lock
for N-Type and S-Type cabinets
Part Number(s) : SDLOCK-XXX
S-Type Single Hinge Door
Lock Swing Handle Replacement
•
Remove Cam Screw (use 10mm socket wrench), Cam Stop
(note orientation of Cam Stop)
, and Cam from existing handle
•
Remove Door Handle Backing Plate and remove existing door handle (use 10mm socket wrench)
•
Install Swing Handle by securing Door Handle Backing Plate to Swing Handle (use 10mm socket wrench)
•
Install Cam, Cam Stop, and Cam Screw (use 10mm socket wrench)
•
When replacing Cam Stop, ensure that the orientation is the same as when it was removed.
Tool List:
•
10mm Hex Driver
Cam Screw
Cam
Stop
Door Handle
Backing Plate
Cam
Swing
Handle
Swing Handle Lock
Qty: 1
Swing Handle Lock Key
Qty: 2