![background image](http://html.mh-extra.com/html/panasonic/sl-j905/sl-j905_operating-instructions-manual_261351001.webp)
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
consult your dealer for instructions.
Troubleshooting guide
1
Dear Customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product,
please read these instructions completely. Please keep
this manual for future reference.
Matsushita Electric Industrial Co., Ltd.
Web Site:
http://www.panasonic.co.jp/global/
GN GK GH GC SG
EB
EG
Note:
“EB” on the packaging indicates the United Kingdom.
Portable CD player
Operating Instructions
SL-J905/SL-J910
RQT7224-B
F1003TH1024
p
No play.
No sound or there is
a lot of noise.
Cannot hear sound
from the speaker.
Play doesn’t resume
from the last point
stopped.
≥
The HOLD function is on (
➪
page 5).
≥
The batteries may have run empty (
➪
page 4).
(If play is extremely short even after fully recharging the batteries,
the batteries may have exceeded their life. Rechargeable batteries
can be recharged approximately 300 times.)
≥
The disc isn’t correctly set.
≥
The disc is scratched or dirty. (Tracks skipped.)
≥
There is moisture on the lens. Wait for about an hour and then try again.
≥
The lens is dirty: clean it with a blower (recommended
product:
SZZP1038C
).If the lens gets marked with
fingerprints, gently wipe them off with a cotton swab.
≥
The unit may not read MP3 correctly if it is shaken
while it is reading the files.
≥
Play of a multi-session disc may not be possible if
there is a blank data segment between sessions.
≥
If there is large JPEG data etc. within a MP3 file, sound
may become muted and play may not be possible.
≥
If you try playing a CD that contains CD-ROM format data
and normal audio data (CD-DA), output from one of the
above may become silent, and play may not be possible.
≥
Ensure the plugs are inserted firmly.
≥
Wipe the plugs clean with a clean cloth.
≥
Noise may occur when playing MP3 if recording quality is poor.
≥
The elapsed playing time disappears and sound is
interrupted if bumps continue repeatedly.
≥
When listening with the speaker, sound cannot be
heard from the earphones.
≥
When you are listening with the earphones
and try to connect with the speaker, the unit
automatically shuts down in order to prevent noise.
≥
Turn [SPEAKER, OFF ON] to [ON] (
➪
page 5).
≥
Are you using the AC adaptor?(Cannot play
by just inserting rechargeable batteries.)
≥
This doesn’t work if you change discs.
≥
This doesn’t work during random play.
≥
It may not work correctly under some conditions.
SL-J910
SL-J905
SL-J905
Play doesn’t start
from the first track.
Cannot search
through tracks.
Cannot specify the
AB segment.
Cannot change the
Digital Re-master mode.
Digital Re-master
does not work.
Cannot skip albums.
Cannot hear the remote
control’s operation
tone.
The remote control
does not work properly.
Cannot recharge.
The AC adaptor becomes
warm during recharging.
The batteries are taking
a long time to recharge.
Play time is short
after recharging.
The battery indicator fails
to appear or is incorrect.
The unit stops
working.
≥
Random play modes may be on (
➪
page 6).
≥
Play resumes from the last point stopped.
≥
You cannot search through MP3 files.
≥
You may not be able to specify segment A or B at the
end of disc.
≥
The mode cannot be changed when selecting a track while
stopped.
≥
Depending on the type of MP3 disc recording, the
effect may not appear.
≥
You cannot skip between the first and last albums during play.
≥
The operation tone may be off (
➪
page 6).
≥
You cannot hear this sound when listening with the
speaker.
≥
Use only the included remote control to operate this
unit.
≥
You aren’t using the special rechargeable batteries.
≥
You must insert two batteries before you can recharge them.
≥
The unit must be off before you can recharge.
≥
This is normal.
≥
The batteries may take a maximum of 6 hours to
recharge under some conditions.
≥
This may occur after the first time you recharge the
batteries or haven’t used them for a long time. Play
time should be restored after a few recharges.
≥
The batteries can go flat if you leave the AC adaptor
connected after recharging is complete.
≥
The indicator does not appear when the AC adaptor is connected.
≥
The indicator does not appear correctly under some conditions.
≥
Disconnect then reconnect all power sources
(batteries and AC adaptor).
Listening from the speaker
You can listen using the speaker or the earphones. However, you cannot do both.
Playing MP3
This unit can play MP3 files you have recorded to discs.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson
multimedia.
HOLD
This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is interrupted.
≥
The unit and remote control each have independent HOLD switches.
Note on CD-R and CD-RW
This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an audio
recording disc for CD-DA and finalize
§
it when you finish recording. The unit may not be
able to play some discs due to the condition of the recording.
§
A process performed after recording that enables CD-R/CD-RW players to play audio
CD-R and CD-RW.
Resume function
Play begins from the last point stopped. Replacing the disc cancels the function.
Auto off function
If the unit is left in stop mode for approximately 10 minutes, the unit turns itself off
automatically.
The display light
The light in the remote control’s display comes on for about 5 seconds when you press a
button, unless the hold function is on.
SL-J910