background image

© 2008 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.

Order No.VCB0801002CE

Vacuum Cleaner

Model No.

MC-CG683-ZC79
MC-CG683-ZA76
MC-CG683K-ZP47

Product Color :Roiyal Blue
Destination

:Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

5

4 Disassembly and Assembly Instructions

----------------

6

4.1. Dust box cover assembly removal -------------------- 6
4.2. Separate the upper and lower body units ----------- 6
4.3. Printed circuit board AU (P.C.B. AU) removal ------ 7
4.4. Motor removal ---------------------------------------------- 8
4.5. Cord reel partition unit replacement -----------------10
4.6. Rail base U replacement -------------------------------10
4.7. Spring-loaded cord reel pre-winding-----------------10

5 Wiring Connection Diagram

---------------------------------

11

6 Schematic Diagram

---------------------------------------------

11

7 Exploded View and Replacement Parts List

-----------

12

7.1. EXPLODED VIEW (ATTACHMENTS) --------------12
7.2. PARTS LIST (ATTACHMENTS) ----------------------13
7.3. EXPLODED VIEW (BODY UNIT) --------------------14
7.4. PARTS LIST (BODY UNIT) ----------------------------15

7.5. PACKING INSTRUCTIONS --------------------------- 16
7.6. PACKING LIST ------------------------------------------- 17

Summary of Contents for MC-CG683-ZA76


















Reviews: