181
Ø9.5 (3/8˝)
Ø8.5
(11/32˝)
7
0
PT-AE1000
Attachement plate
2
0
(2
-9
/1
6
˝)
150 (5-29/32˝)
1
5
0
(5
-2
9
/3
2
˝)
1
6
0
(6
-5
/1
6
˝)
8
2
(3
-7
/3
2
˝)
3
2
(1
-1
/4
˝)
1
4
0
(5
-1
/2
˝)
1
1
4
(4
-1
/2
˝)
130 (5-1/8˝)
104 (4-3/32˝)
(2
-3
/4
˝)
2
5
(3
1
/3
2
˝)
(7-1/8˝)
65
(2-9/16˝)
S
P
E
C
F
I
L
E
ET-
PKE1000S
Ceiling mount bracket
As of November 2006
< 1 >
Specifications
Vertical correction angle:
+5°, -15°
Horizontal slant correction angle:
±10°
Horizontal turn correction angle:
±5°
Dimensions (W x H x D):
468 x 200 x 191 mm (18-7/16˝ x 7-7/8˝ x 7-17/32˝)
Weight:
1.9 kg (4.2 lbs)
Attachment plate
Illustration shows the ET-PKE1000S attached to
the projector.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . 1
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted screws (M4 x 8) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.
C a u t i o n :
•
All mounting work must be done by a qualified technician.
•
Ensure that the mounting (ceiling) area has sufficient strength.
•
Read the enclosed mounting instructions carefully before starting the mounting procedure.
•
When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
•
Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
