background image

Thank you for purchasing this Panasonic product.

■ 

Before using this product, please read the instructions carefully, and 

save this manual for future use.

■ Before using this product, be sure to read [Read this first!] (Page E-2).

Model No.

   

ET-LAV200C

EN

G

LI

SH

Operating Instructions

Replacement lamp unit 

Commercial Use

 

TQZJ626-1

Summary of Contents for ET-LAV200C

Page 1: ...sing this product please read the instructions carefully and save this manual for future use Before using this product be sure to read Read this first Page E 2 Model No ET LAV200C ENGLISH Operating Instructions Replacement lamp unit Commercial Use TQZJ626 1 ...

Page 2: ...c shocks or explosions can result if this is not done When replacing the lamp turn the power off and allow it to cool for at least 1 hour before handling it otherwise it can cause burns J J Notes on replacing the lamp unit The light source lamp is a glass component If it is hit on a hard object or dropped breakage may occur Be careful when handling a light source lamp A Phillips screwdriver is nec...

Page 3: ...the lamp cover fixing screw and open the lamp cover z z Remove the lamp cover by pulling it slowly toward the direction of the arrow 3 Use a Phillips screwdriver to loosen the three lamp unit fixing screws until the screws turn freely Hold the used lamp unit by its handles and pull it gently from the projector 4 Insert the new lamp unit in correct direction Tighten the three lamp unit fixing screw...

Page 4: ...art Name Hazardous substances Pb Hg Cd Cr VI PBB PBDE Projection lamp Mechanical parts This table is prepared in accordance with the provisions of SJ T 11364 The amount of hazardous substances included in all homogeneous materials for the relevant part does not exceed the limit specified in GB T 26572 The amount of hazardous substances included in all homogeneous materials for the relevant part exc...

Reviews: