background image

Operating Instructions

(Household)

 Rechargeable Shaver

Model No. ES‑LV61

Before operating this unit, please read these instructions completely and save them for future use.

Thank you for choosing a Panasonic shaver ES‑LV61. With 
our WET/DRY technology, you can enjoy using your 
Panasonic shaver dry or in the shower or bath for gentle 
and easy shaving. Please read all instructions before use.

Important

This shaver has a built‑in rechargeable battery. Do not throw into 
fire, apply heat, or charge, use, or leave in a high temperature 
environment.

Before use
This WET/DRY shaver can be used for wet shaving using 
shaving lather or for dry shaving. You can use this watertight 
shaver in the shower and clean with water. The following symbol 
means suitable for use in a bath or shower.

Treat yourself to wet lather shaves for at least three weeks and 
notice the difference. Your Panasonic WET/DRY shaver requires 
a little time to get used to because your skin and beard need 
about a month to adjust to any new shaving method.
Using the shaver

Caution

The outer foil is very thin and can be damaged if not used 
correctly. Check that the foil is not damaged before using 
the shaver. Do not use the shaver if the foil is damaged as 
you will cut your skin.

Terminate the usage when there is an abnormality or failure.
Do not share your shaver with your family or other people. 
Doing so may result in infection or inflammation.

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the 
appliance by a person responsible for their safety. Children 
should be supervised to ensure that they do not play with the 
appliance.

Charging the shaver

Never use the AC adaptor in the bathroom or shower room.
Do not use any power cord or AC adaptor other than the AC 
adaptor (RE7‑59).
Plug in the AC adaptor into a household outlet where there is 
no moisture and handle it with dry hands.
Hold the AC adaptor when disconnecting it from the household 
outlet. If you tug on the power cord, you may damage it.
The supply cord cannot be replaced. If the cord is damaged, 
the AC adaptor should be scrapped.

Cleaning the shaver

Warning

Disconnect the power cord from the shaver before 
cleaning it in water to prevent electric shock.

Keep both the inner blades inserted. If only one of the inner 
blades is inserted, the shaver may be damaged.
If you clean the shaver with water, do not use salt water or hot 
water. Do not soak the shaver in water for a long period of 
time.
Clean the housing only with a soft cloth slightly dampened 
with tap water or soapy tap water. Do not use thinner, benzine, 
alcohol or other chemicals.

Storing the shaver

Store the shaver in a place with low humidity after use.
Do not store the shaver where it will be exposed to direct 
sunlight or other heat sources.
Disconnect the power cord when storing the shaver.

Do not bend the power cord or wrap it around the shaver.
Keep the oil away from children.

Parts identification

a

c

e

b

d

f

g


A

 Protective cap

B

 Outer foil section

1

 Foil frame

2

 System outer foil

3

 System outer foil release 

buttons

C

 Inner blades

D

 Main body

4

 Foil frame release buttons

5

 LCD panel

a.  Used time
b.  Battery capacity

c.  Charge status
d.  Sonic vibration
e.  Foil/blade check
f.  Clean
g.  Battery capacity

6

 Appliance socket

7

 Lock ring

8

 Power switch [0/1]

9

 Trimmer

:

 Trimmer handle

E

 AC adaptor (RE7‑59)

;

 Power cord 

<

 Appliance plug

F

 Travel case

G

 Cleaning brush

H

 Oil

Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.

Rotate the lock ring to “ ” to unlock the power 
switch:
For when shaving, washing the shaver, lubricating 
the shaver.

Rotate the lock ring to “ ” to lock the power 
switch:
For when carrying the shaver.

Charge

Charging the shaver

1

1

Insert the appliance plug into 
the shaver.

2

2

Plug in the AC adaptor into a 
household outlet.

1

2

Turn the shaver off before attaching.
Charging is completed after approx. 1 hour.

You cannot operate the shaver while charging.

F

 EN

Printed in Japan

ES0000XX000X  X0000‑00000

Panasonic Electric Works Co., Ltd.

http://panasonic.net

2

3

ES-LV61_AUS.indb   1

2011/02/28   17:14:09

Reviews: