background image

Operating Instructions

LCD View Finder

Before operating this product, please read the instructions carefully and save this manual for future use.

ENGLISH

VQT5M42-1

SS1215HM1066 -YI
Printed in Japan

Model No. 

AK-HVF100G

ENGLISH

Before using this product, be sure to read "Read this first!" (pages 3 to 6).

DEUTSCH

Bitte lesen Sie sorgfältig die „Bitte lesen Sie zuerst diesen Hinweis!“ vor der Nutzung dieses 
Produkts. (Seiten 7 bis 8).
Weitere Informationen finden Sie auf der Panasonic-Webseite 

(http://pro-av.panasonic.net/en/

manual/index.html)

 und in der Bedienungsanleitung (HTML).

FRANÇAIS

Avant d’utiliser cet appareil, assurez-vous de lire la section « Lire ces informations en premier ! » 
(pages 9 à 11).
Pour de plus amples informations, visiter le site Web de Panasonic 

(http://pro-av.panasonic.net/

en/manual/index.html)

 et consulter le mode d’emploi (HTML).

ITALIANO

Prima di utilizzare il prodotto, assicurarsi di leggere “Leggere prima quanto segue!” (pagine 12 
13).
Per maggiori informazioni, per favore visitare il sito web Panasonic 

(http://pro-av.panasonic.net/

en/manual/index.html)

, e fare riferimento alle istruzioni per l’uso (HTML).

ESPAÑOL

Antes de usar este producto, asegúrese de leer “Lea esto primero” (páginas 14 a 16).
Si desea obtener más información, visite el sitio web de Panasonic 

(http://pro-av.panasonic.net/

en/manual/index.html)

 y consulte las instrucciones de funcionamiento (HTML).

Summary of Contents for AK-HVF100G





































Reviews: