Preparing the PakPod for use.
The PakPod is shipped flat with the internal PE board not installed in the bag.
This saves space and makes shipping more efficient. To install the PE board:
1.
Locate the Velcro strip that is attached to the black PE board. With the Velcro
facing down, fold the PE board as shown and insert it into the bag.
2.
Push the PE board in as far as it will
go and place the corners of the PE board
in the corners of the bag.
3.
Fold the bag's Velcro flap under the PE board to secure the PE
board in place.
