INSTALLATION GUIDE
FFLE Series LED Flood
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 1 of 3
Need help? (800) 988 -6386 Email: [email protected] Website: www.PacLights.com
PL_INST_FFLE_v0
FFLE FLOOD MOUNT
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PacLights fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNINGS:
•
Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.
•
To prevent wiring damage or abrasion, do not expose wiring to edges of sharp objects.
CAUTION:
•
For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened fi rmly. Apply weatherproof silicone
sealant around the edge of the Back Box and/or Junction Box. This is especially important with an uneven wall surface. Silicone all plugs and
unused conduit entries.
FIG. 1
FFLE 100
FFLE 150
FFLE 200 / 240
Connect the ACL and the ACN from the FFLE Fixture to the conduit with the AC power Supply Cable. Follow the Wiring Diagram provided.
AC POWER SUPPLY
FFLE DRIVER
GRA
Y (-)
PURPLE (+)
HOT [BLACK]
NEUTRAL [WHITE]
GROUND [GREEN]
WIRING DIAGRAM
DIM
INPUT
2
FIG. 2
The Flood Mount is available for all FFLE fi xtures (Fig. 1).
1
FLOOD MOUNT
FFLE FIXTURE
The Flood Mount can be removed for all FFLE fi xtures. If installed,
remove the Flood Mount by removing the Screws, Lock Washers,
Washers, and Angle Knobs (Fig. 2).
FLOOD
MOUNT
ANGLE KNOB
LOCKWASHER
WASHER
SCREW
