background image

PLEASE READ THIS BOOK

This operator’s book has important information for the use and safe operation of this machine.  Read 

this book carefully before using the machine.  Keep this book and tell all operators to read the book.  If 

you do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings.

For new books, please download your copy from our website www.pacificfloorcare.com or write to: 

               

Pacific Floorcare

               2259 S. Sheridan Drive

               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is no concealed freight damage.  If such damage is 

discovered, file a “CONCEALED DAMAGE REPORT” immediately with the delivering carrier. 

The  contents  of  this  manual  are  based  on  the  latest  product  information  available  at  the  time  of                     

publication.  Pacific reserves the right to make changes or improvements without notice.

Thank you for purchasing a Pacific Floorcare product.  Warranty registration will allow us to better 

serve you over the lifetime of the product.  For quick and easy registration,  go to:  

www.pacificfloorcare.com/Register Product.

PARTS & OPERATING MANUAL

SCE-4 

SELF CONTAINED EXTRACTOR

Summary of Contents for SCE-4













Reviews: