Pacific Floorcare S-24 Manual Download

Page: 1 / 92

S-24 / S-28 / S-32

22 GALLON MID-SIZE AUTOSCRUBBER

Thank you for purchasing a Pacific Floorcare product. Carefully inspect all components for freight damage. If such dam

age is discovered, file a “CONCEALED DAMAGE REPORT” immediately with the delivering carrier.

Read this manual carefully and keep it near the machine, protected from liquids and other damaging substances. Failure to

follow the instructions may result in injury or damage to equipment and property.

The contents of this manual are based on the latest product information available at the time of publication. Pacific Floor

care reserves the right to make changes or improvements without being obliged to apply changes to the machines previ

ously sold.

New manuals can be downloaded from:

www.pacificfloorcare.com/manuals

Summary of Contents for S-24





























































































Search results

Summary of Contents for S-24

Reviews:

Related manuals for S-24

Brands by name

Popular brands

Pacific Floorcare S-24, Manual

Search results

Summary of Contents for S-24

Reviews:

Related manuals for S-24

Brands by name

Popular brands