MODEL # WF-151284P 8 Person Family Cabin Tent
with Screen Porch
Rainfly
Tent Body
Steel, Leg Poles with White Tape
SPOL-L154.2BK
Steel, Gable Poles with Blue Tape
SPOL-G169BK
N/A
N/A
Wheeled Carry Bag
1
1
6
1
6
Steel, Gable Poles with U Clip on Both Ends
SPOL-G169UBK
2
Steel, Side Eave Poles with Red Tape
SPOL-S398.4BK
2
Steel, Center Ridge Pole with Red Tape
SPOL-R398.4BK
1
Hanging Shelf
N/A
1
Pole Bag
N/A
1
Stake Bag
N/A
1
Guy Lines
GROP-3MBW
6
3-way Hubs for Center Ridge Pole Ends
TPM-120-1
3-way Hub for Center Ridge Pole Center
TPM-120-2
1
2
3-way Hubs for Eave Pole Corners
(Front left and Back right corners)
3086-3#
2
3-way Hubs for Eave Pole Corners
(Front right and Back left corners)
3086-4#
2
3-way Hubs for Left Eave Pole Center
3086-1#
1
3-way Hubs for Right Eave Pole Center
3086-2#
N/A
1
FABRIC BODY:
POLES:
HUBS (attached to the poles):
CARRY BAG:
Steel Stakes
17
STS-180
STAKES:
UNIVERSAL PARTS:
Steel Gable Poles (with clip on both ends)
STEP 1:
All hubs(Qty 9) are pre-assembled to the Ridge and Eave Poles
as shown in the diagram below.
TIP:For ease of future setup, DO NOT remove hubs from poles
when dismantling and packing the tent.
STEP 2:
FOR QUICKER SETUP, USE TWO PEOPLE
A Extend all poles and sort into groups by style(ie.Ridge Pole, Eave
Poles,Gable Poles,etc). This will simplify the assembly process.
White sticker on Eave and Ridge Poles must go over screen room.
OPTION “AA”: Drape Rainfly over roof frame before attaching
Steel Leg Poles.
B Slide the Steel Leg Pole into the corresponding hubs. The white
tape on the pole should match the white taped side of the hub.
Twist the pole until you hear a click, indicating the pole is properly
secured to the hub.
C Place the Tent Body underneath the tent frame.
D Lift the pole and insert the pin-ring into the bottom of the Steel
Leg Pole(Total of 6).
OPTION“AA”
